
Deep-Dive with AI
Search across all available documentation for this part.

Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | THS6184PWP |
|---|---|
| Mounting Type | Surface Mount |
| Number of Drivers/Receivers [custom] | 0 |
| Number of Drivers/Receivers [custom] | 2 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 20-PowerTSSOP |
| Package / Case | 0.173 in |
| Package / Case [custom] | 4.4 mm |
| Protocol | xDSL |
| Supplier Device Package | 20-HTSSOP |
| Type | Driver |
| Voltage - Supply [Max] | 32 VDC |
| Voltage - Supply [Min] | 4 V |
THS6184 Series
Dual Port xDSL Line Driver
| Part | Operating Temperature [Max] | Operating Temperature [Min] | Protocol | Package / Case | Number of Drivers/Receivers [custom] | Number of Drivers/Receivers [custom] | Type | Supplier Device Package | Mounting Type | Voltage - Supply [Max] | Voltage - Supply [Min] | Package / Case [custom] | Package / Case |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Texas Instruments | 85 °C | -40 °C | xDSL | 24-VFQFN Exposed Pad | 0 | 2 | Driver | 24-VQFN (5x4) | Surface Mount | 32 VDC | 4 V | ||
Texas Instruments | 85 °C | -40 °C | xDSL | 20-PowerTSSOP | 0 | 2 | Driver | 20-HTSSOP | Surface Mount | 32 VDC | 4 V | 4.4 mm | 0.173 in |
Texas Instruments | 85 °C | -40 °C | xDSL | 20-PowerTSSOP | 0 | 2 | Driver | 20-HTSSOP | Surface Mount | 32 VDC | 4 V | 4.4 mm | 0.173 in |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Texas Instruments | TUBE | 1 | $ 19.73 | |
| 100 | $ 16.08 | |||
| 250 | $ 12.64 | |||
| 1000 | $ 10.72 | |||
Description
General part information
THS6184 Series
The THS6184 is a dual-port, low-power current feedback differential line driver amplifier system ideal for xDSL systems. Its extremely low-power dissipation is ideal for ADSL, ADSL2, ADSL2+, and ADSL2++ systems that must achieve high densities in ADSL central office applications by combining two ports, or four amplifiers, into one package.
The unique architecture of the THS6184 allows the trimmed quiescent current to be much lower than existing line drivers while still achieving high linearity. Distortion at these low-power levels is good with -83-dBc THD at 1 MHz with the low bias mode of 4.2 mA/port. Fixed and variable multiple-bias settings of the amplifiers allows for enhanced power savings for line lengths where the full performance of the amplifier is not required.
The wide output swing of 44-VPPdifferentially with ±12-V power supplies coupled with over 415-mA current drive allow for wide dynamic range, keeping distortion minimized. With a low 3-nV/√Hzvoltage noise coupled with a low 5.9-pA/√Hzinverting current noise, the THS6184 increases the sensitivity of the receive signals allowing for better margins and reach.
Documents
Technical documentation and resources