Specification	SN74AHCT16541DGGR

Current - Output High, Low [custom]	8 mA
Current - Output High, Low [custom]	8 mA
Logic Type	Buffer, Non-Inverting
Mounting Type	Surface Mount
Number of Bits per Element	8
Number of Elements	2
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Output Type	3-State
Package / Case	48-TFSOP
Package / Case	0.24 in
Package / Case [custom]	6.1 mm
Supplier Device Package	48-TSSOP
Voltage - Supply [Max]	5.5 V
Voltage - Supply [Min]	4.5 V

SN74AHCT16541 Series

16-ch, 4.5-V to 5.5-V buffers with TTL-compatible CMOS inputs and 3-state outputs

Part	Number of Elements	Current - Output High, Low [custom]	Current - Output High, Low [custom]	Logic Type	Number of Bits per Element	Operating Temperature [Max]	Operating Temperature [Min]	Package / Case [y]	Package / Case	Package / Case [y]	Mounting Type	Supplier Device Package	Voltage - Supply [Min]	Voltage - Supply [Max]	Output Type	Package / Case	Package / Case [custom]
Texas Instruments SN74AHCT16541DLR	2	8 mA	8 mA	Buffer Non-Inverting	8	85 °C	-40 °C	0.295 in	48-BSSOP	7.5 mm	Surface Mount	48-SSOP	4.5 V	5.5 V	3-State
Texas Instruments SN74AHCT16541DL	2	8 mA	8 mA	Buffer Non-Inverting	8	85 °C	-40 °C	0.295 in	48-BSSOP	7.5 mm	Surface Mount	48-SSOP	4.5 V	5.5 V	3-State
Texas Instruments SN74AHCT16541DGVR	2	8 mA	8 mA	Buffer Non-Inverting	8	85 °C	-40 °C		48-TFSOP		Surface Mount		4.5 V	5.5 V	3-State	0.173 in 4.4 mm
Texas Instruments SN74AHCT16541DGGR	2	8 mA	8 mA	Buffer Non-Inverting	8	85 °C	-40 °C		48-TFSOP		Surface Mount	48-TSSOP	4.5 V	5.5 V	3-State	0.24 in	6.1 mm

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 2.02
	Digi-Reel®	1	$ 2.02
	Tape & Reel (TR)	2000	$ 1.19
		4000	$ 1.16
		6000	$ 1.15
Texas Instruments	LARGE T&R	1	$ 1.91
		100	$ 1.58
		250	$ 1.13
		1000	$ 0.85

Description

General part information

SN74AHCT16541 Series

The 'AHCT16541 devices are noninverting 16-bit buffers composed of two 8-bit sections with separate output-enable signals. For either 8-bit buffer section, the two output-enable (1OE1\ and 1OE2\ or 2OE1\ and 2OE2\) inputs must both be low for the corresponding Y outputs to be active. If either output-enable input is high, the outputs of that 8-bit buffer section are in the high-impedance state.

To ensure the high-impedance state during power up or power down, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.

The SN54AHCT16541 is characterized for operation over the full military temperature range of -55°C to 125°C. The SN74AHCT16541 is characterized for operation from -40°C to 85°C.

Documents

Technical documentation and resources

16-Bit Buffers/Drivers With 3-State Outputs datasheet (Rev. H)

Data sheet