Specification	OPA890ID

-3db Bandwidth	260 MHz
Amplifier Type	Voltage Feedback
Current - Input Bias	100 nA
Current - Output / Channel [custom]	40 mA
Current - Supply	1.1 mA
Gain Bandwidth Product	130 MHz
Mounting Type	Surface Mount
Number of Circuits	1
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Package / Case	8-SOIC
Package / Case [x]	0.154 in
Package / Case [y]	3.9 mm
Slew Rate	500 V/µs
Supplier Device Package	8-SOIC
Voltage - Input Offset	1 mV
Voltage - Supply Span (Max) [Max]	12 V
Voltage - Supply Span (Min) [Min]	3 V

OPA890 Series

Part	Current - Supply	Gain Bandwidth Product	Voltage - Input Offset	Voltage - Supply Span (Max) [Max]	Mounting Type	Package / Case	Package / Case [y]	Package / Case [x]	Amplifier Type	Number of Circuits	Current - Input Bias	Supplier Device Package	Operating Temperature [Max]	Operating Temperature [Min]	Slew Rate	Voltage - Supply Span (Min) [Min]	-3db Bandwidth	Current - Output / Channel [custom]
Texas Instruments OPA890IDG4	1.1 mA	130 MHz	1 mV	12 V	Surface Mount	8-SOIC	3.9 mm	0.154 in	Voltage Feedback	1	100 nA	8-SOIC	85 °C	-40 °C	500 V/µs	3 V	260 MHz
Texas Instruments OPA890IDR	1.1 mA	130 MHz	1 mV	12 V	Surface Mount	8-SOIC	3.9 mm	0.154 in	Voltage Feedback	1	100 nA	8-SOIC	85 °C	-40 °C	500 V/µs	3 V	260 MHz
Texas Instruments OPA890ID	1.1 mA	130 MHz	1 mV	12 V	Surface Mount	8-SOIC	3.9 mm	0.154 in	Voltage Feedback	1	100 nA	8-SOIC	85 °C	-40 °C	500 V/µs	3 V	260 MHz	40 mA
Texas Instruments OPA890IDBVT	1.1 mA	130 MHz	1 mV	12 V	Surface Mount	SOT-23-6			Voltage Feedback	1	100 nA	SOT-23-6	85 °C	-40 °C	500 V/µs	3 V	260 MHz	40 mA
Texas Instruments OPA890IDBVTG4	1.1 mA	130 MHz	1 mV	12 V	Surface Mount	SOT-23-6			Voltage Feedback	1	100 nA	SOT-23-6	85 °C	-40 °C	500 V/µs	3 V	260 MHz

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tube	1	$ 2.50
		10	$ 2.25
		75	$ 2.12
		150	$ 1.81
		300	$ 1.69
		525	$ 1.48
		1050	$ 1.23
		2550	$ 1.14
		5025	$ 1.10
Newark	Each	1	$ 3.22
		10	$ 3.00
		25	$ 2.80
		50	$ 2.66
		150	$ 2.51
		300	$ 2.38
		525	$ 2.34
Texas Instruments	TUBE	1	$ 2.15
		100	$ 1.78
		250	$ 1.28
		1000	$ 0.96

Description

General part information

OPA890 Series

The OPA890 represents a major step forward in unity-gain stable, voltage-feedback op amps. A new internal architecture provides slew rate and full-power bandwidth previously found only in wideband, current-feedback op amps. These capabilities provide exceptional full power bandwidth. Using a single +5V supply, the OPA890 can deliver a 1V to 4V output swing with over 35mA drive current and 220MHz bandwidth. This combination of features makes the OPA890 an ideal RGB line driver or single-supply analog-to-digital converter (ADC) input driver.

The low 1.1mA supply current of the OPA890 is precisely trimmed at +25°C. This trim, along with low temperature drift, ensures lower maximum supply current than competing products. System power may be reduced further using the optional disable control pin. Leaving this disable pin open, or holding it HIGH, operates the OPA890 normally. If pulled LOW, the OPA890 supply current drops to less than 30µA while the output goes into a high-impedance state.

Documents

Technical documentation and resources

Low-Power, Wideband, Voltage-Feedback Operational Amplifier w/ Disable datasheet (Rev. B)

Data sheet