
SN74LVCH16541ADLR
Active16-CH, 1.65-V TO 3.6-V BUFFERS WITH BUS-HOLD AND 3-STATE OUTPUTS
Deep-Dive with AI
Search across all available documentation for this part.

SN74LVCH16541ADLR
Active16-CH, 1.65-V TO 3.6-V BUFFERS WITH BUS-HOLD AND 3-STATE OUTPUTS
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | SN74LVCH16541ADLR |
|---|---|
| Current - Output High, Low | 24 mA |
| Logic Type | Buffer, Non-Inverting |
| Mounting Type | Surface Mount |
| Number of Bits per Element | 8 |
| Number of Elements | 2 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | 3-State |
| Package / Case | 48-BSSOP |
| Package / Case [y] | 0.295 in |
| Package / Case [y] | 7.5 mm |
| Supplier Device Package | 48-SSOP |
| Voltage - Supply [Max] | 3.6 V |
| Voltage - Supply [Min] | 1.65 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.68 | |
| 10 | $ 1.51 | |||
| 25 | $ 1.42 | |||
| 100 | $ 1.21 | |||
| 250 | $ 1.14 | |||
| 500 | $ 1.00 | |||
| Digi-Reel® | 1 | $ 1.68 | ||
| 10 | $ 1.51 | |||
| 25 | $ 1.42 | |||
| 100 | $ 1.21 | |||
| 250 | $ 1.14 | |||
| 500 | $ 1.00 | |||
| Tape & Reel (TR) | 1000 | $ 0.87 | ||
| 2000 | $ 0.82 | |||
| 3000 | $ 0.79 | |||
| 5000 | $ 0.76 | |||
| 7000 | $ 0.74 | |||
| 10000 | $ 0.72 | |||
| Texas Instruments | LARGE T&R | 1 | $ 1.26 | |
| 100 | $ 1.04 | |||
| 250 | $ 0.75 | |||
| 1000 | $ 0.56 | |||
Description
General part information
SN74LVCH16541A Series
This 16-bit buffer/driver is designed for 1.65-V to 3.6-V VCCoperation.
The SN74LVCH16541A is a noninverting 16-bit buffer composed of two 8-bit sections with separate output-enable signals. For either 8-bit buffer section, the two output-enable (1OE1\ and 1OE2\ or 2OE1\ and 2OE2\) inputs must be low for the corresponding Y outputs to be active. If either output-enable input is high, the outputs of that 8-bit buffer section are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Documents
Technical documentation and resources