OPA314AIDBVT
ActiveSINGLE, 5.5-V, 3-MHZ, LOW NOISE (4.6-NV/√HZ), RRIO OPERATIONAL AMPLIFIER
Deep-Dive with AI
Search across all available documentation for this part.
OPA314AIDBVT
ActiveSINGLE, 5.5-V, 3-MHZ, LOW NOISE (4.6-NV/√HZ), RRIO OPERATIONAL AMPLIFIER
Technical Specifications
Parameters and characteristics for this part
| Specification | OPA314AIDBVT |
|---|---|
| Amplifier Type | General Purpose |
| Current - Input Bias | 0.2 pA |
| Current - Output / Channel | 20 mA |
| Current - Supply | 150 µA |
| Gain Bandwidth Product | 3 MHz |
| Mounting Type | Surface Mount |
| Number of Circuits | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | Rail-to-Rail |
| Package / Case | SC-74A, SOT-753 |
| Slew Rate | 1.5 V/µs |
| Supplier Device Package | SOT-23-5 |
| Voltage - Input Offset | 500 çV |
| Voltage - Supply Span (Max) [Max] | 5.5 V |
| Voltage - Supply Span (Min) [Min] | 1.8 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Arrow | N/A | 1 | $ 1.11 | |
| 10 | $ 0.73 | |||
| 50 | $ 0.68 | |||
| 100 | $ 0.48 | |||
| Digikey | Cut Tape (CT) | 1 | $ 1.39 | |
| 10 | $ 1.24 | |||
| 25 | $ 1.18 | |||
| 100 | $ 0.97 | |||
| Digi-Reel® | 1 | $ 1.39 | ||
| 10 | $ 1.24 | |||
| 25 | $ 1.18 | |||
| 100 | $ 0.97 | |||
| Tape & Reel (TR) | 250 | $ 0.90 | ||
| 500 | $ 0.80 | |||
| 1250 | $ 0.63 | |||
| 2500 | $ 0.59 | |||
| 6250 | $ 0.56 | |||
| 12500 | $ 0.54 | |||
| Texas Instruments | SMALL T&R | 1 | $ 1.03 | |
| 100 | $ 0.79 | |||
| 250 | $ 0.58 | |||
| 1000 | $ 0.42 | |||
Description
General part information
OPA314-Q1 Series
The OPAx314-Q1 series is a family of single-, and dual-, and quad-channel operational amplifiers (op-amps) that represents a new generation of low-power, general-purpose CMOS amplifiers. Rail-to-rail input and output swings, low quiescent current (150 µA typically at 5 VS) combined with a wide bandwidth of 3 MHz, and very low noise (14 nV/√Hzat 1 kHz) make this device family very attractive for a variety of battery-powered applications that require a good balance between cost and performance. The low input bias current supports applications with mega-ohm source impedances.
The robust design of the OPAx314-Q1 series provides ease-of-use to the circuit designer: unity-gain stability with capacitive loads of up to 300 pF, an integrated RF/EMI rejection filter, no phase reversal in overdrive conditions, and high electrostatic discharge (ESD) protection (4-kV HBM).
The device is optimized for low-voltage operation as low as 1.8 V (±0.9 V) and up to 5.5 V (±2.75 V), and is specified over the full extended temperature range of –40°C to +125°C.
Documents
Technical documentation and resources
