
CAT25320VI-GT3
ActiveEEPROM SERIAL-SPI 32K-BIT 4K X 8 2.5V/3.3V/5V 8-PIN SOIC N T/R

CAT25320VI-GT3
ActiveEEPROM SERIAL-SPI 32K-BIT 4K X 8 2.5V/3.3V/5V 8-PIN SOIC N T/R
Technical Specifications
Parameters and characteristics for this part
| Specification | CAT25320VI-GT3 |
|---|---|
| Clock Frequency | 10 MHz |
| Memory Format | EEPROM |
| Memory Interface | SPI |
| Memory Organization [custom] | 4 K |
| Memory Organization [custom] | 8 bits |
| Memory Size | 32 Kbit |
| Memory Type | Non-Volatile |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 8-SOIC |
| Package / Case [x] | 0.154 in |
| Package / Case [y] | 3.9 mm |
| Supplier Device Package | 8-SOIC |
| Technology | EEPROM |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 1.8 V |
| Write Cycle Time - Word, Page | 5 ms |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 0.58 | |
| 10 | $ 0.52 | |||
| 25 | $ 0.49 | |||
| 50 | $ 0.48 | |||
| 100 | $ 0.46 | |||
| 250 | $ 0.44 | |||
| 500 | $ 0.42 | |||
| 1000 | $ 0.41 | |||
| Digi-Reel® | 1 | $ 0.58 | ||
| 10 | $ 0.52 | |||
| 25 | $ 0.49 | |||
| 50 | $ 0.48 | |||
| 100 | $ 0.46 | |||
| 250 | $ 0.44 | |||
| 500 | $ 0.42 | |||
| 1000 | $ 0.41 | |||
| Tape & Reel (TR) | 3000 | $ 0.39 | ||
| 6000 | $ 0.37 | |||
| 9000 | $ 0.36 | |||
| 15000 | $ 0.36 | |||
| 21000 | $ 0.35 | |||
| Newark | Each (Supplied on Full Reel) | 3000 | $ 0.39 | |
| 6000 | $ 0.36 | |||
| 12000 | $ 0.34 | |||
| 18000 | $ 0.32 | |||
| 30000 | $ 0.30 | |||
| ON Semiconductor | N/A | 1 | $ 0.31 | |
Description
General part information
CAT25320 Series
The CAT25320 is a EEPROM Serial 32-Kb SPI device internally organized as 4096x8 bits. This features a 32-byte page write buffer and supports the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS). In addition, the required bus signals are clock input (SCK), data input (SI) and data output (SO) lines. TheHOLDinput may be used to pause any serial communication with the CAT25320 device. The device features software and hardware write protection, including partial as well as full array protection.
Documents
Technical documentation and resources