LM7705MME/NOPB
ActiveCHARGE PUMP INV -0.233V -35MA 8-PIN VSSOP T/R
Deep-Dive with AI
Search across all available documentation for this part.
LM7705MME/NOPB
ActiveCHARGE PUMP INV -0.233V -35MA 8-PIN VSSOP T/R
Technical Specifications
Parameters and characteristics for this part
| Specification | LM7705MME/NOPB |
|---|---|
| Current - Output | 26 mA |
| Frequency - Switching | 92 kHz |
| Function | Step-Down |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 125 ¯C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Negative |
| Output Type | 1.81 mOhm |
| Package / Case | 8-MSOP, 8-TSSOP |
| Package / Case | 3 mm |
| Package / Case [custom] | 0.118 in |
| Synchronous Rectifier | False |
| Voltage - Input (Max) [Max] | 5.25 V |
| Voltage - Input (Min) [Min] | 3 V |
| Voltage - Output (Min/Fixed) | -23 mV |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Arrow | N/A | 250 | $ 0.35 | |
| Digikey | Cut Tape (CT) | 1 | $ 0.71 | |
| 10 | $ 0.63 | |||
| 25 | $ 0.60 | |||
| 100 | $ 0.49 | |||
| Digi-Reel | 1 | $ 0.71 | ||
| 10 | $ 0.63 | |||
| 25 | $ 0.60 | |||
| 100 | $ 0.49 | |||
| Tape & Reel (TR) | 250 | $ 0.46 | ||
| 500 | $ 0.41 | |||
| 1250 | $ 0.38 | |||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 1.21 | |
| 10 | $ 1.15 | |||
| 25 | $ 1.10 | |||
| 50 | $ 1.05 | |||
| 100 | $ 1.01 | |||
| 250 | $ 0.97 | |||
| 500 | $ 0.95 | |||
| 1000 | $ 0.94 | |||
| Texas Instruments | SMALL T&R | 1 | $ 0.75 | |
| 100 | $ 0.57 | |||
| 250 | $ 0.42 | |||
| 1000 | $ 0.30 | |||
Description
General part information
LM7705 Series
The LM7705 device is a switched capacitor voltage inverter with a low noise, −0.23 V fixed negative voltage regulator. This device is designed to be used with low voltage amplifiers to enable the amplifiers output to swing to zero volts. The −0.23 V is used to supply the negative supply pin of an amplifier while maintaining less then 5.5 V across the amplifier. Rail-to-Rail output amplifiers cannot output zero volts when operating from a single-supply voltage and can result in error accumulation due to amplifier output saturation voltage being amplified by following gain stages. A small negative supply voltage will prevent the amplifiers output from saturating at zero volts and will help maintain an accurate zero through a signal processing chain. Additionally, when an amplifier is used to drive an input of the ADC, the amplifier can output a zero voltage signal and the full input range of an ADC can be used. The LM7705 device has a shutdown pin to minimize standby power consumption.
The LM7705 device is a switched capacitor voltage inverter with a low noise, −0.23 V fixed negative voltage regulator. This device is designed to be used with low voltage amplifiers to enable the amplifiers output to swing to zero volts. The −0.23 V is used to supply the negative supply pin of an amplifier while maintaining less then 5.5 V across the amplifier. Rail-to-Rail output amplifiers cannot output zero volts when operating from a single-supply voltage and can result in error accumulation due to amplifier output saturation voltage being amplified by following gain stages. A small negative supply voltage will prevent the amplifiers output from saturating at zero volts and will help maintain an accurate zero through a signal processing chain. Additionally, when an amplifier is used to drive an input of the ADC, the amplifier can output a zero voltage signal and the full input range of an ADC can be used. The LM7705 device has a shutdown pin to minimize standby power consumption.
Documents
Technical documentation and resources
