LM5068MM-4/NOPB
ActiveHOT SWAP CONTROLLER 1-CH -10V N-CHANNEL NEGATIVE VOLTAGE 8-PIN VSSOP T/R
Deep-Dive with AI
Search across all available documentation for this part.
LM5068MM-4/NOPB
ActiveHOT SWAP CONTROLLER 1-CH -10V N-CHANNEL NEGATIVE VOLTAGE 8-PIN VSSOP T/R
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | LM5068MM-4/NOPB |
|---|---|
| Applications | -48 V |
| Current - Supply | 820 µA |
| Features | Auto Retry, Turn On Voltage |
| Internal Switch(s) | False |
| Mounting Type | Surface Mount |
| Number of Channels | 1 |
| Operating Temperature [Max] | 105 ░C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 8-MSOP, 8-TSSOP |
| Package / Case | 3 mm |
| Package / Case [custom] | 0.118 in |
| Programmable Features | Current Limit, Circuit Breaker, UVLO, OVP, Fault Timeout |
| Type | Hot Swap Controller |
| Voltage - Supply [Max] | -10 V |
| Voltage - Supply [Min] | -90 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 3.41 | |
| 10 | $ 3.06 | |||
| 25 | $ 2.90 | |||
| 100 | $ 2.51 | |||
| 250 | $ 2.38 | |||
| 500 | $ 2.14 | |||
| Digi-Reel® | 1 | $ 3.41 | ||
| 10 | $ 3.06 | |||
| 25 | $ 2.90 | |||
| 100 | $ 2.51 | |||
| 250 | $ 2.38 | |||
| 500 | $ 2.14 | |||
| Tape & Reel (TR) | 1000 | $ 1.80 | ||
| 2000 | $ 1.71 | |||
| 5000 | $ 1.65 | |||
| Texas Instruments | LARGE T&R | 1 | $ 2.58 | |
| 100 | $ 2.26 | |||
| 250 | $ 1.58 | |||
| 1000 | $ 1.27 | |||
Description
General part information
LM5068 Series
The LM5068 hot-swap controller provides intelligent control of power supply connections during the insertion and removal of circuit cards powered by live system backplanes.
The LM5068 provides both in-rush current control and short-circuit protection functions, and limits power supply transients in the backplane caused by the insertion of additional circuit cards. The LM5068 controls the external N-Channel MOSFET to provide programmable load current limiting and circuit breaker functions using a single external current sense resistor. The LM5068 issues a power good (PWRGD) signal at the conclusion of a successful power-on sequence. Input over-voltage or under -voltage fault conditions will cancel the PWRGD indication.
The LM5068-1 and -2 indicate power-good as an open-drain active HIGH PWRGD state. The LM5068-3 and -4 indicate power-good as an open-drain active LOW PWRGD state. The LM5068-1 and -3 latch off after a fault condition is detected while the LM5068-2 and -4 continuously re-try at intervals set by a programmable timer.
Documents
Technical documentation and resources
