TPA3140D2PWPR
Active10-W STEREO, 20-W MONO, 4.5- TO 14.4-V, ANALOG IN CLASS-D AUDIO AMPLIFIER W/ INDUCTOR FREE & AGL
Deep-Dive with AI
Search across all available documentation for this part.
TPA3140D2PWPR
Active10-W STEREO, 20-W MONO, 4.5- TO 14.4-V, ANALOG IN CLASS-D AUDIO AMPLIFIER W/ INDUCTOR FREE & AGL
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TPA3140D2PWPR |
|---|---|
| Features | Short-Circuit, Thermal Protection, Depop |
| Max Output Power x Channels @ Load | 10 W, 2 channels |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | 2-Channel (Stereo) |
| Package / Case | 28-PowerTSSOP |
| Package / Case [custom] | 4.4 mm |
| Package / Case [custom] | 0.173 " |
| Supplier Device Package | 28-HTSSOP |
| Type | Class D |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 2.15 | |
| 10 | $ 1.93 | |||
| 25 | $ 1.82 | |||
| 100 | $ 1.55 | |||
| 250 | $ 1.45 | |||
| 500 | $ 1.27 | |||
| 1000 | $ 1.05 | |||
| Digi-Reel® | 1 | $ 2.15 | ||
| 10 | $ 1.93 | |||
| 25 | $ 1.82 | |||
| 100 | $ 1.55 | |||
| 250 | $ 1.45 | |||
| 500 | $ 1.27 | |||
| 1000 | $ 1.05 | |||
| Tape & Reel (TR) | 2000 | $ 0.63 | ||
| Texas Instruments | LARGE T&R | 1 | $ 1.12 | |
| 100 | $ 0.93 | |||
| 250 | $ 0.67 | |||
| 1000 | $ 0.50 | |||
Description
General part information
TPA3140D2 Series
The TPA3140D2 is an efficient, Class-D audio power amplifier for driving bridged-tied stereo speakers at up to 10 W, 6 Ω, or 8 Ω (per channel).
Advanced EMI Suppression Technology with Spread Spectrum Control and 1SPW modulation scheme enables the use of inexpensive ferrite bead filters at the outputs while meeting EMC requirements for system cost reduction. TPA3140D2 is not only fully protected against shorts and overload, the SpeakerGuard™ speaker protection circuitry includes an adjustable Automatic Gain Limit (AGL), an adjustable power limiter and a DC detection circuit for protection of the connected speakers. The AGL allows adjustment of the maximum output voltage without signal clipping for enhanced speaker protection and audio quality. The DC detect and Pin-to-Pin, Pin-to-Ground, and Pin-to-Power Short Circuit protection circuit protect the speakers from output DC and pin shorts caused in production. The outputs are also fully protected against shorts to GND, PVCC, and output-to-output. The short-circuit protection and thermal protection includes an auto recovery feature.
The TPA3140D2 can drive stereo speakers with as low as 4-Ω impedance. The high efficiency of the TPA3140D2, 90% with an 8-Ω load, eliminates the need for an external heat sink, and TPA3140D2 will be able to output full power on a 2-layer PCB.
Documents
Technical documentation and resources