OPA2375IDR
ActiveDUAL, 5.5-V, 10-MHZ, LOW NOISE (4.6-NV/√HZ), RRO OPERATIONAL AMPLIFIER
Deep-Dive with AI
Search across all available documentation for this part.
OPA2375IDR
ActiveDUAL, 5.5-V, 10-MHZ, LOW NOISE (4.6-NV/√HZ), RRO OPERATIONAL AMPLIFIER
Technical Specifications
Parameters and characteristics for this part
| Specification | OPA2375IDR |
|---|---|
| Amplifier Type | CMOS |
| Current - Input Bias | 3 pA |
| Current - Output / Channel | 68 mA |
| Current - Supply | 990 µA |
| Gain Bandwidth Product | 10 MHz |
| Mounting Type | Surface Mount |
| Number of Circuits | 2 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | Rail-to-Rail |
| Package / Case | 8-SOIC |
| Package / Case [x] | 0.154 in |
| Package / Case [y] | 3.9 mm |
| Slew Rate | 4.6 V/µs |
| Supplier Device Package | 8-SOIC |
| Voltage - Input Offset | 150 µV |
| Voltage - Supply Span (Max) [Max] | 5.5 V |
| Voltage - Supply Span (Min) [Min] | 1.7 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.53 | |
| 10 | $ 1.38 | |||
| 25 | $ 1.30 | |||
| 100 | $ 1.11 | |||
| 250 | $ 1.04 | |||
| 500 | $ 0.91 | |||
| 1000 | $ 0.75 | |||
| Digi-Reel® | 1 | $ 1.53 | ||
| 10 | $ 1.38 | |||
| 25 | $ 1.30 | |||
| 100 | $ 1.11 | |||
| 250 | $ 1.04 | |||
| 500 | $ 0.91 | |||
| 1000 | $ 0.75 | |||
| Tape & Reel (TR) | 2500 | $ 0.67 | ||
| 5000 | $ 0.64 | |||
| 12500 | $ 0.61 | |||
| Texas Instruments | LARGE T&R | 1 | $ 1.36 | |
| 100 | $ 0.92 | |||
| 250 | $ 0.71 | |||
| 1000 | $ 0.47 | |||
Description
General part information
OPA2375 Series
The OPAx375 family includes single (OPA375), dual (OPA2375) and quad-channel (OPA2375) general-purpose CMOS operation amplifiers (op amp) that provide an extremely low noise figure of 3.5 nV/√Hz, a low offset of 500 µV (maximum) and a wide bandwidth of 10 MHz. The low noise and wide bandwidth make the OPAx375 family attractive for a variety of precision applications that require a good balance between cost and performance. Additionally, the input bias current of the OPAx375 supports applications with high source impedance.
The robust design of the OPAx375 family provides ease-of-use to the circuit designer due to the unity-gain stability, integrated RFI/EMI rejection filter, no phase reversal in overdrive conditions, and high electrostatic discharge (ESD) protection (2-kV HBM). Additionally, the resistive open-loop output impedance allows for easy stabilization with much higher capacitive loads.
This op amp is optimized for low-voltage operation as low as 2.25 V (±1.125 V) for the OPA375 and 1.7 V (±0.85 V) for the OPA2375 and OPA4375. All of the devices operate up to 5.5 V (±2.75 V), and are specified over the temperature range of –40°C to 125°C.
