INA241A3QDGKRQ1
ActiveAEC-Q100, -4V TO 110V BIDIRECTIONAL ULTRAPRECISE CURRENT SENSE AMPLIFIER WITH ENHANCED PWM REJECTION
Deep-Dive with AI
Search across all available documentation for this part.
INA241A3QDGKRQ1
ActiveAEC-Q100, -4V TO 110V BIDIRECTIONAL ULTRAPRECISE CURRENT SENSE AMPLIFIER WITH ENHANCED PWM REJECTION
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | INA241A3QDGKRQ1 |
|---|---|
| -3db Bandwidth | 1.1 MHz |
| Amplifier Type | Current Sense |
| Current - Input Bias | 35 µA |
| Current - Supply | 2.5 mA |
| Mounting Type | Surface Mount |
| Number of Circuits | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | Single-Ended |
| Package / Case | 8-MSOP, 8-TSSOP |
| Package / Case | 3 mm |
| Package / Case [custom] | 0.118 in |
| Slew Rate | 8 V/µs |
| Voltage - Input Offset | 3 µV |
| Voltage - Supply Span (Max) [Max] | 20 V |
| Voltage - Supply Span (Min) [Min] | 2.7 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 4.26 | |
| 10 | $ 3.83 | |||
| 25 | $ 3.62 | |||
| 100 | $ 3.14 | |||
| 250 | $ 2.98 | |||
| 500 | $ 2.67 | |||
| 1000 | $ 2.25 | |||
| Digi-Reel® | 1 | $ 4.26 | ||
| 10 | $ 3.83 | |||
| 25 | $ 3.62 | |||
| 100 | $ 3.14 | |||
| 250 | $ 2.98 | |||
| 500 | $ 2.67 | |||
| 1000 | $ 2.25 | |||
| Tape & Reel (TR) | 2500 | $ 2.14 | ||
| Texas Instruments | LARGE T&R | 1 | $ 2.42 | |
| 100 | $ 2.12 | |||
| 250 | $ 1.49 | |||
| 1000 | $ 1.20 | |||
Description
General part information
INA241A-Q1 Series
The INA241x-Q1 is an ultra-precise, bidirectional current sense amplifier that can measure voltage drops across shunt resistors over a wide common-mode range from –5V to 110V, independent of the supply voltage. The high-precision current measurement is achieved through a combination of low offset voltage (±10µV, maximum), small gain error (±0.01%, maximum) and a high DC CMRR (typical 166dB). The INA241x-Q1 is designed for high voltage, bidirectional measurements in switching systems that see large common-mode voltage transients at the device inputs. The enhanced PWM rejection circuitry inside the INA241x-Q1 provides minimal signal disturbance at the output due to the common-mode voltage transitions at the input.
The INA241x-Q1 operates from a single 2.7V to 20V supply, drawing 2.5mA of supply current. The INA241x-Q1 is available in five gain options: 10V/V, 20V/V, 50V/V, 100V/V, and 200V/V. Multiple gain options allow for optimization between available shunt resistor values and wide output dynamic range requirements.
The INA241x-Q1 is specified over operating temperature range of −40°C to 125°C.
Documents
Technical documentation and resources
