Specification	SN65HVD1040HD

Duplex	Half
Mounting Type	Surface Mount
Operating Temperature [Max]	347 °F
Operating Temperature [Min]	-55 °C
Package / Case	8-SOIC
Package / Case [x]	0.154 in
Package / Case [y]	3.9 mm
Protocol	CANbus
Receiver Hysteresis	125 mV
Supplier Device Package	8-SOIC
Type	Transceiver
Voltage - Supply [Max]	5.25 V
Voltage - Supply [Min]	4.75 V

SN65HVD1040-HT Series

High Temp Industrial CAN Transceiver with Ultra Low Power Sleep mode and Remote Bus Wake-up

Part	Supplier Device Package	Package / Case	Package / Case [y]	Package / Case [x]	Protocol	Duplex	Receiver Hysteresis	Voltage - Supply [Min]	Voltage - Supply [Max]	Type	Mounting Type	Operating Temperature [Max]	Operating Temperature [Min]
Texas Instruments SN65HVD1040DG4	8-SOIC	8-SOIC	3.9 mm	0.154 in	CANbus	Half	125 mV	4.75 V	5.25 V	Transceiver	Surface Mount	125 °C	-40 °C
Texas Instruments SN65HVD1040D	8-SOIC	8-SOIC	3.9 mm	0.154 in	CANbus	Half	125 mV	4.75 V	5.25 V	Transceiver	Surface Mount	125 °C	-40 °C
Texas Instruments SN65HVD1040HD	8-SOIC	8-SOIC	3.9 mm	0.154 in	CANbus	Half	125 mV	4.75 V	5.25 V	Transceiver	Surface Mount	347 °F	-55 °C
Texas Instruments SN65HVD1040DR	8-SOIC	8-SOIC	3.9 mm	0.154 in	CANbus	Half	125 mV	4.75 V	5.25 V	Transceiver	Surface Mount	125 °C	-40 °C

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tube	75	$ 90.48
Texas Instruments	TUBE	1	$ 95.82
		100	$ 92.94
		250	$ 77.38
		1000	$ 72.04

Description

General part information

SN65HVD1040-HT Series

The SN65HVD1040 meets or exceeds the specifications of the ISO 11898 standard for use in applications employing a Controller Area Network (CAN). As CAN transceivers, these devices provide differential transmit and receive capability for a CAN controller at signaling rates of up to 1 megabit per second (Mbps). The signaling rate of a line is the number of voltage transitions that are made per second expressed in the units bps (bits per second).

Designed for operation in especially harsh environments, the device features ±12 kV ESD protection on the bus and split pins, cross-wire, overvoltage and loss of ground protection from –27 to 40 V, a –12 V to 12 V common-mode range, and will withstand voltage transients from –200 V to 200 V according to ISO 7637.

The STB input (pin 8) selects between two different modes of operation; high-speed or low-power mode. The high-speed mode of operation is selected by connecting STB to ground.

Documents

Technical documentation and resources

Low-Power CAN Transceiver With Bus Wake-Up, SN65HVD1040-HT datasheet (Rev. D)

Data sheet