Specification	MAX895LESA+

Current - Output (Max) [Max]	250 mA
Fault Protection	Current Limiting (Adjustable), Over Temperature
Input Type	Non-Inverting
Interface	On/Off
Mounting Type	Surface Mount
Number of Outputs	2
Operating Temperature [Max]	85 C
Operating Temperature [Min]	-40 ¯C
Output Configuration	High Side
Output Type	P-Channel
Package / Case	0.154 in
Package / Case	8-SOIC
Package / Case	3.9 mm
Ratio - Input:Output	1:2
Rds On (Typ)	250 mOhm
Supplier Device Package	8-SOIC
Switch Type	General Purpose
Voltage - Load [Max]	5.5 V
Voltage - Load [Min]	2.7 V
Voltage - Supply (Vcc/Vdd)	Not Required

MAX895 Series

Dual, Current-Limited, High-Side P-Channel Switches with Thermal Shutdown

Part	Output Configuration	Supplier Device Package	Mounting Type	Package / Case	Package / Case	Package / Case	Switch Type	Ratio - Input:Output	Number of Outputs	Rds On (Typ)	Input Type	Output Type	Voltage - Supply (Vcc/Vdd)	Fault Protection	Interface	Current - Output (Max) [Max]	Voltage - Load [Min]	Voltage - Load [Max]	Operating Temperature [Max]	Operating Temperature [Min]
Analog Devices Inc./Maxim Integrated MAX895LESA-T	High Side	8-SOIC	Surface Mount	0.154 in	8-SOIC	3.9 mm	General Purpose	1:2	2	250 mOhm	Non-Inverting	P-Channel	Not Required	Current Limiting (Adjustable) Over Temperature Short Circuit UVLO	On/Off	250 mA	2.7 V	5.5 V	85 C	-40 ¯C
Analog Devices Inc./Maxim Integrated MAX895LESA+T	High Side	8-SOIC	Surface Mount	0.154 in	8-SOIC	3.9 mm	General Purpose	1:2	2	250 mOhm	Non-Inverting	P-Channel	Not Required	Current Limiting (Adjustable) Over Temperature	On/Off	250 mA	2.7 V	5.5 V	85 C	-40 ¯C
Analog Devices Inc./Maxim Integrated MAX895LESA+	High Side	8-SOIC	Surface Mount	0.154 in	8-SOIC	3.9 mm	General Purpose	1:2	2	250 mOhm	Non-Inverting	P-Channel	Not Required	Current Limiting (Adjustable) Over Temperature	On/Off	250 mA	2.7 V	5.5 V	85 C	-40 ¯C

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	N/A	198	$ 6.24
		9300	$ 6.24
	Tube	1	$ 7.35
		10	$ 5.01
		25	$ 4.41
		100	$ 3.73
		250	$ 3.40
		500	$ 3.20
		1000	$ 3.04
		2500	$ 2.88
Newark	Each	1	$ 7.80
		10	$ 4.55
		25	$ 4.29
		50	$ 4.04
		100	$ 3.78
		300	$ 3.53
		500	$ 3.27

Description

General part information

MAX895 Series

The MAX894L/MAX895L smart, dual, low-voltage, P-channel, MOSFET power switches are intended for high-side load-switching applications. These switches operate with inputs from +2.7V to +5.5V, making them ideal for both 3V and 5V systems. Internal current-limiting circuitry protects the input supply against overload. Thermal-overload protection limits power dissipation and junction temperature.The MAX894L/MAX895L's maximum current limits are 500mA and 250mA, respectively. The current limit through the switches is programmed with resistors from SET A/SET B to ground. When the switches are on, the quiescent supply current is a low 16µA. When the switches are off, the supply current decreases to 0.1µA.The MAX894L/MAX895L are available in an 8-pin SO package.ApplicationsAccess Bus SlotsPCMCIA SlotsPortable Equipment

Documents

Technical documentation and resources

Technical Data Sheet EN

Datasheet

Package Drawing - Small-Outline IC, Narrow (0.15in)

Package Drawing