Deep-Dive with AI
Search across all available documentation for this part.
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TPS22930AYZVT |
|---|---|
| Current - Output (Max) [Max] | 2 A |
| Fault Protection | Reverse Current, UVLO |
| Features | Slew Rate Controlled |
| Input Type | Non-Inverting |
| Interface | On/Off |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | High Side |
| Output Type | P-Channel |
| Package / Case | DSBGA, 4-XFBGA |
| Ratio - Input:Output [custom] | 1:1 |
| Rds On (Typ) | 35 mOhm |
| Supplier Device Package | 4-DSBGA (0.88x0.88) |
| Switch Type | General Purpose |
| Voltage - Load [Max] | 5.5 V |
| Voltage - Load [Min] | 1.4 V |
| Voltage - Supply (Vcc/Vdd) | False |
TPS22930A Series
5.5-V, 2-A, 35-mΩ load switch
| Part | Utilized IC / Part | Function | Contents | Supplied Contents | Type | Voltage - Supply (Vcc/Vdd) | Rds On (Typ) | Ratio - Input:Output [custom] | Current - Output (Max) [Max] | Number of Outputs | Output Configuration | Output Type | Supplier Device Package | Operating Temperature [Max] | Operating Temperature [Min] | Input Type | Voltage - Load [Max] | Voltage - Load [Min] | Interface | Switch Type | Package / Case | Fault Protection | Mounting Type | Features |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 Texas Instruments | TPS22930A | Power Distribution Switch (Load Switch) | Board(s) | Board(s) | Power Management | |||||||||||||||||||
Texas Instruments | 35 mOhm | 1:1 | 2 A | 1 | High Side | P-Channel | 4-DSBGA (0.88x0.88) | 85 °C | -40 °C | Non-Inverting | 5.5 V | 1.4 V | On/Off | General Purpose | 4-XFBGA DSBGA | Reverse Current UVLO | Surface Mount | Slew Rate Controlled | ||||||
Texas Instruments | 35 mOhm | 1:1 | 2 A | 1 | High Side | P-Channel | 4-DSBGA (0.88x0.88) | 85 °C | -40 °C | Non-Inverting | 5.5 V | 1.4 V | On/Off | General Purpose | 4-XFBGA DSBGA | Reverse Current UVLO | Surface Mount | Slew Rate Controlled |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.32 | |
| 10 | $ 1.18 | |||
| 25 | $ 1.12 | |||
| 100 | $ 0.92 | |||
| Digi-Reel® | 1 | $ 1.32 | ||
| 10 | $ 1.18 | |||
| 25 | $ 1.12 | |||
| 100 | $ 0.92 | |||
| Tape & Reel (TR) | 250 | $ 0.60 | ||
| 500 | $ 0.53 | |||
| 1250 | $ 0.49 | |||
| Texas Instruments | SMALL T&R | 1 | $ 0.98 | |
| 100 | $ 0.75 | |||
| 250 | $ 0.55 | |||
| 1000 | $ 0.40 | |||
Description
General part information
TPS22930A Series
The TPS22930 is a small, low RONload switch with controlled turn on. The device contains a P-channel MOSFET that can operate over an input voltage range of 1.4 V to 5.5 V. The switch is controlled by an on/off input (ON), which is capable of interfacing directly with low-voltage control signals. The TPS22930 is active high enable.
The TPS22930 device provides circuit breaker functionality by disabling the body diode during reverse voltage (also known as reverse current) situations. Reverse current protection is active only when the power-switch is disabled (off). The device disengages the body diode when the output voltage (VOUT) is driven higher than the input (VIN) to stop the flow of current towards the input side of the switch. Additionally, under-voltage lockout (UVLO) protection turns the switch off if the input voltage is too low.
The slew rate of the device is internally controlled in order to avoid inrush current.
Documents
Technical documentation and resources