Integrated Circuits (ICs)

NV25080DWHFT3G

Active

ON Semiconductor

EEPROM, 8 KBIT, 1K X 8BIT, SPI, 10 MHZ, SOIC, 8 PINS

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsDatasheet Datasheet

Integrated Circuits (ICs)

NV25080DWHFT3G

Active

ON Semiconductor

EEPROM, 8 KBIT, 1K X 8BIT, SPI, 10 MHZ, SOIC, 8 PINS

Deep-Dive with AI

DocumentsDatasheet Datasheet

Specifications Series Pricing Description Documents

Technical Specifications

Parameters and characteristics for this part

Specification	NV25080DWHFT3G

Access Time	40 ns
Clock Frequency	10 MHz
Grade	Automotive
Memory Format	EEPROM
Memory Interface	SPI
Memory Organization	1K x 8
Memory Size	8 Kbit
Memory Type	Non-Volatile
Mounting Type	Surface Mount
Operating Temperature [Max]	150 °C
Operating Temperature [Min]	-40 °C
Package / Case	8-SOIC
Package / Case [x]	0.154 in
Package / Case [y]	3.9 mm
Qualification	AEC-Q100
Supplier Device Package	8-SOIC
Voltage - Supply [Max]	5.5 V
Voltage - Supply [Min]	2.5 V
Write Cycle Time - Word, Page	4 ms

NV25080MUW Series

EEPROM Serial 8-Kb SPI - Automotive Grade 1 (+125°C), Wettable Flank UDFN Package

Part	Package / Case	Package / Case [custom]	Package / Case [custom]	Technology	Memory Size	Memory Type	Operating Temperature [Min]	Operating Temperature [Max]	Memory Interface	Grade	Qualification	Mounting Type	Access Time	Write Cycle Time - Word, Page	Voltage - Supply [Min]	Voltage - Supply [Max]	Memory Format	Memory Organization	Supplier Device Package	Clock Frequency	Package / Case [y]	Package / Case [x]
ON Semiconductor NV25080DTHFT3G	8-TSSOP	0.173 "	4.4 mm	EEPROM	8 Kbit	Non-Volatile	-40 °C	150 °C	SPI	Automotive	AEC-Q100	Surface Mount	40 ns	4 ms	2.5 V	5.5 V	EEPROM	1K x 8	8-TSSOP	10 MHz
ON Semiconductor NV25080MUW2VTAG	8-UFDFN Exposed Pad			EEPROM	8 Kbit	Non-Volatile	-40 °C	125 °C	SPI	Automotive	AEC-Q100	Surface Mount	35 ns	5 ms	1.8 V	5.5 V	EEPROM	1K x 8	8-UDFN (2x2)	10 MHz
ON Semiconductor NV25080DTVLT3G	8-TSSOP	0.173 "	4.4 mm	EEPROM	8 Kbit	Non-Volatile	-40 °C	125 °C	SPI			Surface Mount	20 ns	4 ms	1.7 V	5.5 V	EEPROM	1K x 8	8-TSSOP	20 MHz
ON Semiconductor NV25080MUW3VTBG	8-UFDFN Exposed Pad			EEPROM	8 Kbit	Non-Volatile	-40 °C	125 °C	SPI	Automotive	AEC-Q100	Surface Mount	35 ns	5 ms	1.8 V	5.5 V	EEPROM	1K x 8	8-UDFN (2x3)	10 MHz
ON Semiconductor NV25080DWHFT3G	8-SOIC				8 Kbit	Non-Volatile	-40 °C	150 °C	SPI	Automotive	AEC-Q100	Surface Mount	40 ns	4 ms	2.5 V	5.5 V	EEPROM	1K x 8	8-SOIC	10 MHz	3.9 mm	0.154 in

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 0.47
		10	$ 0.46
		25	$ 0.43
		50	$ 0.43
		100	$ 0.38
		250	$ 0.38
		500	$ 0.37
		1000	$ 0.36
	Digi-Reel®	1	$ 0.47
		10	$ 0.46
		25	$ 0.43
		50	$ 0.43
		100	$ 0.38
		250	$ 0.38
		500	$ 0.37
		1000	$ 0.36
	Tape & Reel (TR)	3000	$ 0.34
		6000	$ 0.32
		15000	$ 0.32
		30000	$ 0.31
ON Semiconductor	N/A	1	$ 0.23

Description

General part information

NV25080MUW Series

NV25080 are a EEPROM Serial 8-Kb SPI - Automotive Grade 0 (+150°C) devices internallyorganized as 1Kx8 bits. It features a 32−byte page write buffer and supports the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pause any serial communication with the NV25xxx device. The device features software and hardware write protection, including partial as well as full array protection. Byte Level On−Chip ECC (Error Correction Code) makes the device suitable for high reliability applications. The device offers an additional Identification Page which can be permanently write protected.

Documents

Technical documentation and resources