TMP423AIDCNT
ObsoleteTRIPLE REMOTE AND LOCAL TEMPERATURE SENSOR WITH N-FACTOR AND SERIES-R CORRECTION
Deep-Dive with AI
Search across all available documentation for this part.
TMP423AIDCNT
ObsoleteTRIPLE REMOTE AND LOCAL TEMPERATURE SENSOR WITH N-FACTOR AND SERIES-R CORRECTION
Technical Specifications
Parameters and characteristics for this part
| Specification | TMP423AIDCNT |
|---|---|
| Accuracy - Highest (Lowest) [Max] | 1.5 °C |
| Accuracy - Highest (Lowest) [Min] | 2.5 °C |
| Features | Output Switch, Programmable Limit, One-Shot, Shutdown Mode |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | SMBus |
| Package / Case | SOT-23-8 |
| Resolution | 11 b |
| Sensing Temperature - Local [Max] | 125 °C |
| Sensing Temperature - Local [Min] | -40 °C |
| Sensing Temperature - Remote [Max] | 191 °C |
| Sensing Temperature - Remote [Min] | -64 °C |
| Supplier Device Package | SOT-23-8 |
| Test Condition [Max] | 85 °C |
| Test Condition [Max] | 125 °C |
| Test Condition [Min] | -40 °C |
| Test Condition [Min] | 15 °C |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 2.7 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 2.30 | |
| 5 | $ 1.94 | |||
| 10 | $ 1.80 | |||
| 25 | $ 1.64 | |||
| 50 | $ 1.52 | |||
| 100 | $ 1.41 | |||
| Digi-Reel® | 1 | $ 2.30 | ||
| 5 | $ 1.94 | |||
| 10 | $ 1.80 | |||
| 25 | $ 1.64 | |||
| 50 | $ 1.52 | |||
| 100 | $ 1.41 | |||
| Tape & Reel (TR) | 250 | $ 1.28 | ||
| 500 | $ 1.19 | |||
| 750 | $ 1.14 | |||
| 1250 | $ 1.08 | |||
| Texas Instruments | SMALL T&R | 1 | $ 1.56 | |
| 100 | $ 1.29 | |||
| 250 | $ 0.93 | |||
| 1000 | $ 0.70 | |||
Description
General part information
TMP423-Q1 Series
The TMP421-Q1, TMP422-Q1, and TMP423-Q1 devices are single, dual, and triple remote, automotive-qualified temperature sensor monitors with a built-in local temperature sensor. The remote temperature sensor diode-connected transistors are typically low-cost, NPN- or PNP-type transistors or diodes that are an integral part of microcontrollers, microprocessors, or field-programmable gate arrays (FPGAs).
Remote accuracy is ±1°C for multiple device manufacturers, with no calibration needed. The two-wire serial interface accepts SMBus write byte, read byte, send byte, and receive byte commands to configure the device.
The TMP421-Q1, TMP422-Q1, and TMP423-Q1 include series resistance cancellation, programmable non-ideality factor, wide remote temperature measurement range (up to +150°C), and diode fault detection.
