OPA4830IPWR
ActiveOP AMP QUAD WIDEBAND AMPLIFIER R-R O/P ±5.5V/11V 14-PIN TSSOP T/R
Deep-Dive with AI
Search across all available documentation for this part.
OPA4830IPWR
ActiveOP AMP QUAD WIDEBAND AMPLIFIER R-R O/P ±5.5V/11V 14-PIN TSSOP T/R
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | OPA4830IPWR |
|---|---|
| -3db Bandwidth | 280 MHz |
| Amplifier Type | Voltage Feedback |
| Current - Input Bias | 5 µA |
| Current - Output / Channel | 82 mA |
| Current - Supply | 17 mA |
| Gain Bandwidth Product | 110 MHz |
| Mounting Type | Surface Mount |
| Number of Circuits | 4 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | Rail-to-Rail |
| Package / Case | 14-TSSOP |
| Package / Case [custom] | 0.173 " |
| Package / Case [custom] | 4.4 mm |
| Slew Rate | 560 V/µs |
| Supplier Device Package | 14-TSSOP |
| Voltage - Input Offset | 2 mV |
| Voltage - Supply Span (Min) [Min] | 2.8 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 6.42 | |
| 10 | $ 4.34 | |||
| 25 | $ 3.81 | |||
| 100 | $ 3.20 | |||
| 250 | $ 2.91 | |||
| 500 | $ 2.73 | |||
| 1000 | $ 2.58 | |||
| Digi-Reel® | 1 | $ 6.42 | ||
| 10 | $ 4.34 | |||
| 25 | $ 3.81 | |||
| 100 | $ 3.20 | |||
| 250 | $ 2.91 | |||
| 500 | $ 2.73 | |||
| 1000 | $ 2.58 | |||
| Tape & Reel (TR) | 2000 | $ 2.46 | ||
| 4000 | $ 2.40 | |||
| Texas Instruments | LARGE T&R | 1 | $ 3.88 | |
| 100 | $ 3.40 | |||
| 250 | $ 2.39 | |||
| 1000 | $ 1.92 | |||
Description
General part information
OPA4830 Series
The OPA4830 is a quad, low-power, single-supply, wideband, voltage-feedback amplifier designed to operate on a single 3V or 5V supply. Operation on ±5V or +10V supplies is also supported. The input range extends less than the negative supply and to within 1.8V of the positive supply. Using complementary common-emitter outputs provides an output swing to within 220mV of either supply while driving 150Ω. High output drive current (±80mA) and low differential gain and phase errors also make this amplifier an excellent choice for single-supply consumer video products.
Low distortion operation is specified by the high gain bandwidth product (110MHz) and slew rate (560V/µs), making the OPA4830 an excellent input buffer stage to 3V and 5V CMOS analog-to-digital converters (ADCs). Unlike other low-power, single-supply amplifiers, distortion performance improves as the signal swing is decreased. A low 9.2nV/√Hz input voltage noise supports wide dynamic range operation.
The OPA4830 is available in an industry-standard, quad pinout TSSOP-14 package.
Documents
Technical documentation and resources
