LM51561HPWPR
Active2.2-MHZ WIDE VIN NONSYNCHRONOUS BOOST, FLYBACK, & SEPIC CONTROLLER WITH SPREAD SPECTRUM AND HICCUP
Deep-Dive with AI
Search across all available documentation for this part.
LM51561HPWPR
Active2.2-MHZ WIDE VIN NONSYNCHRONOUS BOOST, FLYBACK, & SEPIC CONTROLLER WITH SPREAD SPECTRUM AND HICCUP
Technical Specifications
Parameters and characteristics for this part
| Specification | LM51561HPWPR |
|---|---|
| Clock Sync | False |
| Control Features | Current Limit, Power Good, Soft Start, Frequency Control, Enable |
| Duty Cycle (Max) [Max] | 93 % |
| Frequency - Switching [Max] | 2.2 MHz |
| Frequency - Switching [Min] | 100 kHz |
| Function | Step-Up, Step-Up/Step-Down |
| Grade | Automotive |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Positive |
| Output Phases | 1 |
| Output Type | Transistor Driver |
| Package / Case | 14-PowerTSSOP |
| Package / Case [x] | 0.173 in |
| Package / Case [y] | 4.4 mm |
| Qualification | AEC-Q100 |
| Supplier Device Package | 14-HTSSOP |
| Synchronous Rectifier | False |
| Topology | Flyback, SEPIC, Boost |
| Voltage - Supply (Vcc/Vdd) [Max] | 60 V |
| Voltage - Supply (Vcc/Vdd) [Min] | 2.97 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 2.18 | |
| 10 | $ 1.95 | |||
| 25 | $ 1.84 | |||
| 100 | $ 1.57 | |||
| 250 | $ 1.47 | |||
| 500 | $ 1.29 | |||
| 1000 | $ 1.07 | |||
| Digi-Reel® | 1 | $ 2.18 | ||
| 10 | $ 1.95 | |||
| 25 | $ 1.84 | |||
| 100 | $ 1.57 | |||
| 250 | $ 1.47 | |||
| 500 | $ 1.29 | |||
| 1000 | $ 1.07 | |||
| Tape & Reel (TR) | 2000 | $ 1.00 | ||
| 6000 | $ 0.96 | |||
| 10000 | $ 0.92 | |||
| Texas Instruments | LARGE T&R | 1 | $ 1.72 | |
| 100 | $ 1.42 | |||
| 250 | $ 1.02 | |||
| 1000 | $ 0.77 | |||
Description
General part information
LM51561H Series
The LM5156xH (LM5156H and LM51561H) device is a wide input range, non-synchronous boost controller that uses peak current mode control. The device can be used in boost, SEPIC, and flyback topologies.
The device can start up from a 1-cell battery with a minimum of 2.97 V if the BIAS pin is connected to the VCC pin. It can operate with the input supply voltage as low as 1.5 V if the BIAS pin is greater than 3.5 V.
The LM5156xH (LM5156H and LM51561H) device is a wide input range, non-synchronous boost controller that uses peak current mode control. The device can be used in boost, SEPIC, and flyback topologies.
Documents
Technical documentation and resources
