TPD5S116YFFR
ActiveHDMI COMPANION CHIP WITH 5-V LOAD SWITCH, LEVEL SHIFTER, AND ESD CLAMP
Deep-Dive with AI
Search across all available documentation for this part.
TPD5S116YFFR
ActiveHDMI COMPANION CHIP WITH 5-V LOAD SWITCH, LEVEL SHIFTER, AND ESD CLAMP
Technical Specifications
Parameters and characteristics for this part
| Specification | TPD5S116YFFR |
|---|---|
| Applications | Media Players, Cell Phones |
| Mounting Type | Surface Mount |
| Package / Case | DSBGA, 15-UFBGA |
| Supplier Device Package | 15-DSBGA |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 1.1 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.40 | |
| 10 | $ 1.25 | |||
| 25 | $ 1.19 | |||
| 100 | $ 0.98 | |||
| 250 | $ 0.91 | |||
| 500 | $ 0.81 | |||
| 1000 | $ 0.64 | |||
| Digi-Reel® | 1 | $ 1.40 | ||
| 10 | $ 1.25 | |||
| 25 | $ 1.19 | |||
| 100 | $ 0.98 | |||
| 250 | $ 0.91 | |||
| 500 | $ 0.81 | |||
| 1000 | $ 0.64 | |||
| Tape & Reel (TR) | 3000 | $ 0.53 | ||
| Texas Instruments | LARGE T&R | 1 | $ 1.04 | |
| 100 | $ 0.80 | |||
| 250 | $ 0.59 | |||
| 1000 | $ 0.42 | |||
Description
General part information
TPD5S116 Series
TPD5S116 is a single-chip HDMI interface Electrostatic Discharge (ESD) protection device with auto-direction sensing I2C voltage level shifting buffers and a 5-V HDMI compliant current limited load switch. Other key features are hot-plug-detect and Transient Voltage Suppression (TVS) with ESD protection diodes. Each connector-side pin has a TVS diode for circuit protection from ESD. An internal 3.3-V node powers the CEC pin, eliminating the need for a 3.3-V supply on board.
TPD5S116 integrates all external termination resistors needed for the HPD, CEC, SCL, and SDA lines. There are three non-inverting bi-directional translation circuits for the SDA, SCL, and CEC lines. Each has a common power rail (VCCA) on system side from 1.1 V to 3.6 V. A 55-mA current limiting switch regulates current sent from 5V_SYS to 5V_CON. The SCL and SDA pins meet the I2C specification and can drive capacitive loads greater than 750 pF, which exceeds HDMI2.0 specifications. The HPD_CON port has a glitch filter to avoid false detection due to plug bouncing during the HDMI connector insertion.
The TPD5S116 offers reverse current blocking at the 5V_CON pin. In fault conditions, such as when two HDMI transmitters are connected to the same HDMI cable, TPD5S116 ensures that the system is safe from powering up through an external HDMI transmitter. The SCL_CON, SDA_CON, CEC_CON, and HPD_CON pins also feature reverse-current blocking, which ensures that the system sees no leakage if an HDMI receiver is connected while the system is powered off.
Documents
Technical documentation and resources