TRS3227EIDBR
Active3- TO 5.5-V SINGLE CHANNEL 1MBPS RS-232 LINE DRIVER/RECEIVER WITH +/-15-KV IEC-ESD PROTECTION
Deep-Dive with AI
Search across all available documentation for this part.
TRS3227EIDBR
Active3- TO 5.5-V SINGLE CHANNEL 1MBPS RS-232 LINE DRIVER/RECEIVER WITH +/-15-KV IEC-ESD PROTECTION
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TRS3227EIDBR |
|---|---|
| Data Rate | 1 Mbps |
| Duplex | Full |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 16-SSOP |
| Package / Case [custom] | 0.209 in |
| Package / Case [custom] | 5.3 mm |
| Protocol | RS232 |
| Receiver Hysteresis | 500 mV |
| Supplier Device Package | 16-SSOP |
| Type | Transceiver |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 3 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.50 | |
| 10 | $ 1.34 | |||
| 25 | $ 1.28 | |||
| 100 | $ 1.05 | |||
| 250 | $ 0.98 | |||
| 500 | $ 0.87 | |||
| 1000 | $ 0.68 | |||
| Digi-Reel® | 1 | $ 1.50 | ||
| 10 | $ 1.34 | |||
| 25 | $ 1.28 | |||
| 100 | $ 1.05 | |||
| 250 | $ 0.98 | |||
| 500 | $ 0.87 | |||
| 1000 | $ 0.68 | |||
| Tape & Reel (TR) | 2000 | $ 0.64 | ||
| 6000 | $ 0.61 | |||
| 10000 | $ 0.58 | |||
| LCSC | Piece | 1 | $ 2.12 | |
| 10 | $ 1.80 | |||
| 30 | $ 1.60 | |||
| 100 | $ 1.40 | |||
| 500 | $ 1.31 | |||
| 1000 | $ 1.27 | |||
| Texas Instruments | LARGE T&R | 1 | $ 1.11 | |
| 100 | $ 0.86 | |||
| 250 | $ 0.63 | |||
| 1000 | $ 0.45 | |||
Description
General part information
TRS3227E Series
The TRS3227E consists of one line driver, one line receiver, and a dual charge-pump circuit with ±15-kV IEC ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. This device operates at data-signaling rates of 1 Mbit/s in normal operating mode and a maximum of 30-V/µs driver output slew rate. This device also features a logic-level output (READY) that asserts when the charge pump is regulating and the device is ready to begin transmitting.
The TRS3227E achieves a 1-µA supply current using the auto-powerdown plus feature. This device automatically enters a low-power powerdown mode when the RS-232 cable is disconnected or the drivers of the connected peripherals are inactive for more than 30 s. They turn on again when they sense a valid transition at any driver or receiver input. Auto-powerdown saves power without changes to the existing BIOS or operating system.
The TRS3227EC is characterized for operation from 0°C to 70°C. The TRS3227EI is characterized for operation from -40°C to 85°C.
Documents
Technical documentation and resources
