Specification	LM27213SQ/NOPB

Clock Sync	False
Control Features	Soft Start, Current Limit, Enable, Power Good
Function	Step-Down
Mounting Type	Surface Mount
Number of Outputs	1
Operating Temperature [Max]	105 °C
Operating Temperature [Min]	-5 °C
Output Configuration	Positive
Output Phases	1
Output Type	Transistor Driver
Package / Case	48-WFQFN Exposed Pad
Supplier Device Package	48-WQFN (7x7)
Synchronous Rectifier	True
Topology	Buck
Voltage - Supply (Vcc/Vdd) [Max]	6 V
Voltage - Supply (Vcc/Vdd) [Min]	4.75 V

LM27213 Series

Part	Output Configuration	Package / Case	Package / Case	Package / Case [custom]	Topology	Output Phases	Output Type	Number of Outputs	Function	Mounting Type	Control Features	Supplier Device Package	Operating Temperature [Max]	Operating Temperature [Min]	Voltage - Supply (Vcc/Vdd) [Min]	Voltage - Supply (Vcc/Vdd) [Max]
Texas Instruments LM27213MTDX	Positive	48-TFSOP	0.24 in	6.1 mm	Buck	1	Transistor Driver	1	Step-Down	Surface Mount	Current Limit Enable Power Good Soft Start	48-TSSOP	105 °C	-5 °C	4.75 V	6 V
Texas Instruments LM27213SQ	Positive	48-WFQFN Exposed Pad			Buck	1	Transistor Driver	1	Step-Down	Surface Mount	Current Limit Enable Power Good Soft Start	48-WQFN (7x7)	105 °C	-5 °C	4.75 V	6 V
Texas Instruments LM27213SQX/NOPB	Positive	48-WFQFN Exposed Pad			Buck	1	Transistor Driver	1	Step-Down	Surface Mount	Current Limit Enable Power Good Soft Start	48-WQFN (7x7)	105 °C	-5 °C	4.75 V	6 V
Texas Instruments LM27213SQ/NOPB	Positive	48-WFQFN Exposed Pad			Buck	1	Transistor Driver	1	Step-Down	Surface Mount	Current Limit Enable Power Good Soft Start	48-WQFN (7x7)	105 °C	-5 °C	4.75 V	6 V
Texas Instruments LM27213MTD	Positive	48-TFSOP	0.24 in	6.1 mm	Buck	1	Transistor Driver	1	Step-Down	Surface Mount	Current Limit Enable Power Good Soft Start	48-TSSOP	105 °C	-5 °C	4.75 V	6 V
Texas Instruments LM27213MTD/NOPB	Positive	48-TFSOP	0.24 in	6.1 mm	Buck	1	Transistor Driver	1	Step-Down	Surface Mount	Current Limit Enable Power Good Soft Start	48-TSSOP	105 °C	-5 °C	4.75 V	6 V
Texas Instruments LM27213MTDX/NOPB	Positive	48-TFSOP	0.24 in	6.1 mm	Buck	1	Transistor Driver	1	Step-Down	Surface Mount	Current Limit Enable Power Good Soft Start	48-TSSOP	105 °C	-5 °C	4.75 V	6 V

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 9.52
		10	$ 8.60
		25	$ 8.20
		100	$ 7.12
	Digi-Reel®	1	$ 9.52
		10	$ 8.60
		25	$ 8.20
		100	$ 7.12
	Tape & Reel (TR)	250	$ 4.95
Texas Instruments	SMALL T&R	1	$ 8.02
		100	$ 6.54
		250	$ 5.14
		1000	$ 4.36

Description

General part information

LM27213 Series

The LM27213 is a single-phase synchronous buck regulator controller designed to fully support a portable microprocessor. On-chip gate drive makes for a compact, single chip solution. Output currents in excess of 25 Amps are possible.

The IC employs a current mode hysteretic control mechanism. Inductor current is sensed through a low value sense resistor.

The LM27213 will operate over an input voltage range of 5V to 30V. The output voltage is programmed through 6 Voltage Identification (VID) pins and ranges from 0.700V to 1.708V in 64 steps.

Documents

Technical documentation and resources

LM27213 Single Phase Hysteretic Buck Controller datasheet (Rev. A)

Data sheet