Specification	SN75175N

Mounting Type	Through Hole
Number of Drivers/Receivers [custom]	0
Number of Drivers/Receivers [custom]	4
Operating Temperature [Max]	70 °C
Operating Temperature [Min]	0 °C
Package / Case	0.3 in
Package / Case	16-DIP
Package / Case	7.62 mm
Protocol	RS423, RS485, RS422
Receiver Hysteresis	50 mV
Supplier Device Package	16-PDIP
Type	Receiver
Voltage - Supply [Max]	5.25 V
Voltage - Supply [Min]	4.75 V

SN75175 Series

Quadruple Differential Line Receiver

Part	Type	Mounting Type	Number of Drivers/Receivers [custom]	Package / Case	Package / Case	Package / Case	Operating Temperature [Max]	Protocol	Receiver Hysteresis	Supplier Device Package	Voltage - Supply [Min]	Voltage - Supply [Max]	Package / Case [x]	Package / Case [y]
Texas Instruments SN75175NSRE4	Receiver	Surface Mount	4	0.209 "	16-SOIC	5.3 mm	70 °C	RS422 RS423 RS485	50 mV	16-SO	4.75 V	5.25 V
Texas Instruments SN75175DR	Receiver	Surface Mount	4		16-SOIC		70 °C	RS422 RS423 RS485	50 mV	16-SOIC	4.75 V	5.25 V	0.154 in	3.9 mm
Texas Instruments SN75175NSRG4	Receiver	Surface Mount	4	0.209 "	16-SOIC	5.3 mm	70 °C	RS422 RS423 RS485	50 mV	16-SO	4.75 V	5.25 V
Texas Instruments SN75175D	Receiver	Surface Mount	4		16-SOIC		70 °C	RS422 RS423 RS485	50 mV	16-SOIC	4.75 V	5.25 V	0.154 in	3.9 mm
Texas Instruments SN75175DRG4	Receiver	Surface Mount	4		16-SOIC		70 °C	RS422 RS423 RS485	50 mV	16-SOIC	4.75 V	5.25 V	0.154 in	3.9 mm
Texas Instruments SN75175N	Receiver	Through Hole	4	0.3 in	16-DIP	7.62 mm	70 °C	RS422 RS423 RS485	50 mV	16-PDIP	4.75 V	5.25 V
Texas Instruments SN75175NSR	Receiver	Surface Mount	4	0.209 "	16-SOIC	5.3 mm	70 °C	RS422 RS423 RS485	50 mV	16-SO	4.75 V	5.25 V
Texas Instruments SN75175DRE4	Receiver	Surface Mount	4		16-SOIC		70 °C	RS422 RS423 RS485	50 mV	16-SOIC	4.75 V	5.25 V	0.154 in	3.9 mm

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tube	1	$ 4.25
		10	$ 3.81
		25	$ 3.61
		100	$ 3.13
		250	$ 2.97
		500	$ 2.66
		1000	$ 2.24
		2500	$ 2.13
Texas Instruments	TUBE	1	$ 3.56
		100	$ 2.94
		250	$ 2.11
		1000	$ 1.59

Description

General part information

SN75175 Series

The SN65175 and SN75175 are monolithic quadruple differential line receivers with 3-state outputs. They are designed to meet the requirements of ANSI Standards EIA/TIA-422-B, RS-423-B, and RS-485, and several ITU recommendations. These standards are for balanced multipoint bus transmission at rates up to 10 megabits per second. Each of the two pairs of receivers has a common active-high enable.

The receivers feature high input impedance, input hysteresis for increased noise immunity, and input sensitivity of ±200 mV over a common-mode input voltage range of ±12 V. The SN65175 and SN75175 are designed for optimum performance when used with the SN75172 or SN75174 quadruple differential line drivers.

The SN65175 is characterized for operation from −40°C to 85°C. The SN75175 is characterized for operation from 0°C to 70°C.

Documents

Technical documentation and resources

SNx5175 Quadruple Differential Line Receivers datasheet (Rev. D)

Data sheet