Zenode.ai Logo
Beta
24-TSSOP
Integrated Circuits (ICs)

TPS40091PW

Active
Texas Instruments

4 CHANNEL MULTIPHASE BUCK DC/DC CONTROLLER WITH TRI-STATE

Deep-Dive with AI

Search across all available documentation for this part.

DocumentsDatasheet
24-TSSOP
Integrated Circuits (ICs)

TPS40091PW

Active
Texas Instruments

4 CHANNEL MULTIPHASE BUCK DC/DC CONTROLLER WITH TRI-STATE

Deep-Dive with AI

DocumentsDatasheet

Technical Specifications

Parameters and characteristics for this part

SpecificationTPS40091PW
Clock SyncTrue
Control FeaturesCurrent Limit, Power Good, Soft Start, Frequency Control, Enable
Duty Cycle (Max) [Max]87.5 %
Frequency - Switching [Max]1.2 MHz
Frequency - Switching [Min]100 kHz
FunctionStep-Down
Mounting TypeSurface Mount
Number of Outputs4
Operating Temperature [Max]85 °C
Operating Temperature [Min]-40 °C
Output ConfigurationPositive
Output Phases4
Output TypePWM Signal
Package / Case24-TSSOP
Package / Case0.173 in, 4.4 mm
Supplier Device Package24-TSSOP
Synchronous RectifierFalse
TopologyBuck
Voltage - Supply (Vcc/Vdd) [Max]15 V
Voltage - Supply (Vcc/Vdd) [Min]4.5 V

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

DistributorPackageQuantity$
DigikeyTube 300$ 3.75
Texas InstrumentsTUBE 1$ 4.66
100$ 4.08
250$ 2.86
1000$ 2.31

Description

General part information

TPS40091 Series

The TPS4009x is a two-, three-, or four-phase programmable synchronous buck controller that is optimized for low-voltage, high-current applications powered by a 5-V to 15-V distributed supply. A multi-phase converter offers several advantages over a single power stage including lower current ripple on the input and output capacitors, faster transient response to load steps, improved power handling capabilities, and higher system efficiency.

Each phase can be operated at a switching frequency up to 1-MHz, resulting in an effective ripple frequency of up to 4-MHz at the input and the output in a four-phase application. A two-phase design operates 180 degrees out-of-phase, a three-phase design operates 120 degrees out-of-phase, and a four-phase design operates 90 degrees out-of-phase.

The number of phases is programmed by connecting the de-activated phase PWM output to the output of the internal 5-V LDO. In two-phase operation the even phase outputs should be de-activated.

Documents

Technical documentation and resources