TPPM0111DWP
Active1.5-A, DUAL-CHANNEL LOW-DROPOUT VOLTAGE REGULATOR FOR 3.3V AND 1.5V
Deep-Dive with AI
Search across all available documentation for this part.
TPPM0111DWP
Active1.5-A, DUAL-CHANNEL LOW-DROPOUT VOLTAGE REGULATOR FOR 3.3V AND 1.5V
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TPPM0111DWP |
|---|---|
| Current - Output | 300 mA, 1.5 A |
| Mounting Type | Surface Mount |
| Number of Regulators | 2 |
| Output Configuration | Positive |
| Output Type | 1.81 mOhm |
| Package / Case | 20-SOIC |
| Package / Case [diameter] | 7.5 mm |
| Protection Features | Over Current, Over Temperature |
| Supplier Device Package | 20-HSOIC |
| Voltage - Input (Max) [Max] | 5.3 V |
| Voltage - Output (Min/Fixed) | 3.3 V, 1.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tube | 200 | $ 4.75 | |
| Texas Instruments | TUBE | 1 | $ 5.59 | |
| 100 | $ 4.56 | |||
| 250 | $ 3.58 | |||
| 1000 | $ 3.04 | |||
Description
General part information
TPPM0111 Series
The TPPM0111 is a power source intended for use in systems that have a single 5-V input source and require dual, linearly-regulated, low-dropout voltage sources. The outputs must track within 2 V of each other during all conditions and modes of operation. Each output is protected against overcurrent conditions. In the event that one of the outputs is shorted to ground, the other output must maintain a voltage output differential of less than 2 V compared to the output with the abnormal condition.
The 3.3-V ±3% regulated output is capable of driving loads of 1.5 A, and the 1.5-V ±2% regulated output is capable of driving loads of 300 mA under all normal operating conditions. The device is available in a PowerPAD™ thermally-enhanced package for efficient heat management, and requires a copper plane to dissipate the heat.
The TPPM0111 is a power source intended for use in systems that have a single 5-V input source and require dual, linearly-regulated, low-dropout voltage sources. The outputs must track within 2 V of each other during all conditions and modes of operation. Each output is protected against overcurrent conditions. In the event that one of the outputs is shorted to ground, the other output must maintain a voltage output differential of less than 2 V compared to the output with the abnormal condition.
Documents
Technical documentation and resources