Zenode.ai Logo
Beta
SOT-23-5
Integrated Circuits (ICs)

MAX6458UKD0B/GH9

Active
Analog Devices Inc./Maxim Integrated

IC SUPERVISOR 1 CHANNEL SOT23-5

Deep-Dive with AI

Search across all available documentation for this part.

SOT-23-5
Integrated Circuits (ICs)

MAX6458UKD0B/GH9

Active
Analog Devices Inc./Maxim Integrated

IC SUPERVISOR 1 CHANNEL SOT23-5

Deep-Dive with AI

Technical Specifications

Parameters and characteristics for this part

SpecificationMAX6458UKD0B/GH9
Mounting TypeSurface Mount
Number of Voltages Monitored1
Operating Temperature [Max]125 °C
Operating Temperature [Min]-40 °C
OutputOpen Drain or Open Collector
Package / CaseSOT-753, SC-74A
ResetActive Low
Reset Timeout50 µs
Supplier Device PackageSOT-23-5
TypeSimple Reset/Power-On Reset
Voltage - ThresholdAdjustable/Selectable

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

DistributorPackageQuantity$
DigikeyBulk 112$ 2.69

Description

General part information

MAX6458 Series

The MAX6457–MAX6460 high supply voltage, low-power voltage monitors operate over a 4V to 28V supply voltage range. Each device includes a precision bandgap reference, one or two low-offset voltage comparators, internal threshold hysteresis, power-good or reset timeout options, and one or two high-voltage open-drain outputs. Two external resistors (three for window detection) set the trip threshold voltages.The MAX6457 is a single voltage monitor for undervoltage or overvoltage detection. A logic-based clear input either latches the output for overvoltage applications or allows the device to operate in transparent mode. The MAX6458 includes two comparators (one overvoltage and one undervoltage) for window detection and a single output to indicate if the monitored input is within an adjustable voltage window. The MAX6459 includes dual overvoltage/undervoltage comparators with two independent comparator outputs. Use the MAX6459 as a window comparator with separate undervoltage and overvoltage outputs or as two independent, single voltage monitors. The MAX6460 includes a single comparator and an internal reference, and can also accept an external reference. The inverting and noninverting inputs of the comparator are externally accessible to support positive or negative voltage monitors and to configure the device for active-high or active-low output logic.The MAX6457/MAX6458 offer fixed timing options as a voltage detector with a 50µs typical delay or as a reset circuit with a 90ms minimum reset timeout delay. The monitored input must be above the adjusted trip threshold (or within the adjusted voltage window for the MAX6458) for the selected timeout period before the output changes state. The MAX6459/MAX6460 offer only a fixed 50µs timeout period. Internal threshold hysteresis options (0.5%, 5%, and 8.3% for the MAX6457/MAX6458/MAX6459, and 0.5% for the MAX6460) reduce output chatter in noise-sensitive applications. Each device is available in a small SOT23 package and specified over the extended temperature range of -40°C to +125°C.ApplicationsAutomotiveIndustrialMulticell Battery-Stack Powered EquipmentNetworkingNotebooks, eBooksOvervoltage Monitoring/ProtectionTelecomUndervoltage Monitoring/ShutdownWindow Voltage Detection Circuitry

Documents

Technical documentation and resources

No documents available