SN74HC258DR
ActiveQUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS WITH 3-STATE OUTPUTS
Deep-Dive with AI
Search across all available documentation for this part.
SN74HC258DR
ActiveQUADRUPLE 2-LINE TO 1-LINE DATA SELECTORS/MULTIPLEXERS WITH 3-STATE OUTPUTS
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | SN74HC258DR |
|---|---|
| Circuit [custom] | 4 |
| Circuit [custom] | 2:1 |
| Current - Output High, Low [custom] | 7.8 mA |
| Current - Output High, Low [custom] | 7.8 mA |
| Independent Circuits | 1 |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 16-SOIC |
| Package / Case [x] | 0.154 in |
| Package / Case [y] | 3.9 mm |
| Supplier Device Package | 16-SOIC |
| Type | Multiplexer |
| Voltage - Supply [Max] | 6 V |
| Voltage - Supply [Min] | 2 V |
| Voltage Supply Source | Single Supply |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Arrow | N/A | 2500 | $ 0.17 | |
| Digikey | Cut Tape (CT) | 1 | $ 0.85 | |
| 10 | $ 0.53 | |||
| 25 | $ 0.44 | |||
| 100 | $ 0.34 | |||
| 250 | $ 0.29 | |||
| 500 | $ 0.26 | |||
| 1000 | $ 0.24 | |||
| Digi-Reel® | 1 | $ 0.85 | ||
| 10 | $ 0.53 | |||
| 25 | $ 0.44 | |||
| 100 | $ 0.34 | |||
| 250 | $ 0.29 | |||
| 500 | $ 0.26 | |||
| 1000 | $ 0.24 | |||
| Tape & Reel (TR) | 2500 | $ 0.21 | ||
| 5000 | $ 0.20 | |||
| 7500 | $ 0.19 | |||
| 12500 | $ 0.18 | |||
| 17500 | $ 0.17 | |||
| 25000 | $ 0.17 | |||
| 62500 | $ 0.16 | |||
| Texas Instruments | LARGE T&R | 1 | $ 0.30 | |
| 100 | $ 0.23 | |||
| 250 | $ 0.17 | |||
| 1000 | $ 0.12 | |||
Description
General part information
SN74HC258 Series
These devices are designed to multiplex signals from 4-bit data sources to 4-output data lines in bus-organized systems. The 3-state outputs do not load the data lines when the output-enable (G\) input is at a high logic level.
To ensure the high-impedance state during power up or power down, (G\) should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
These devices are designed to multiplex signals from 4-bit data sources to 4-output data lines in bus-organized systems. The 3-state outputs do not load the data lines when the output-enable (G\) input is at a high logic level.
Documents
Technical documentation and resources
