SN74CBT3253CPWR
Active5-V, 4:1, 2-CHANNEL FET BUS SWITCH WITH –2-V UNDERSHOOT PROTECTION
Deep-Dive with AI
Search across all available documentation for this part.
SN74CBT3253CPWR
Active5-V, 4:1, 2-CHANNEL FET BUS SWITCH WITH –2-V UNDERSHOOT PROTECTION
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | SN74CBT3253CPWR |
|---|---|
| Circuit [custom] | 2 |
| Circuit [custom] | 4:1 |
| Independent Circuits | 1 |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 16-TSSOP |
| Package / Case [x] | 0.173 in |
| Package / Case [y] | 4.4 mm |
| Supplier Device Package | 16-TSSOP |
| Type | Multiplexer/Demultiplexer |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 4.5 V |
| Voltage Supply Source | Single Supply |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 0.47 | |
| 10 | $ 0.42 | |||
| 25 | $ 0.39 | |||
| 100 | $ 0.32 | |||
| 250 | $ 0.30 | |||
| 500 | $ 0.25 | |||
| 1000 | $ 0.22 | |||
| Digi-Reel® | 1 | $ 0.47 | ||
| 10 | $ 0.42 | |||
| 25 | $ 0.39 | |||
| 100 | $ 0.32 | |||
| 250 | $ 0.30 | |||
| 500 | $ 0.25 | |||
| 1000 | $ 0.22 | |||
| Tape & Reel (TR) | 2000 | $ 0.22 | ||
| Texas Instruments | LARGE T&R | 1 | $ 0.51 | |
| 100 | $ 0.35 | |||
| 250 | $ 0.27 | |||
| 1000 | $ 0.18 | |||
Description
General part information
SN74CBT3253C Series
The SN74CBT3253C is a high-speed TTL-compatible FET multiplexer/demultiplexer with low ON-state resistance (ron), allowing for minimal propagation delay. Active Undershoot-Protection Circuitry on the A and B ports of the SN74CBT3253C provides protection for undershoot up to -2 V by sensing an undershoot event and ensuring that the switch remains in the proper OFF state.
The SN74CBT3253C is organized as two 1-of-4 multiplexer/demultiplexers with separate output-enable (1OE, 2OE) inputs. The select (S0, S1) inputs control the data path of each multiplexer/demultiplexer. WhenOEis low, the associated multiplexer/demultiplexer is enabled, and the A port is connected to the B port, allowing bidirectional data flow between ports. WhenOEis high, the associated multiplexer/demultiplexer is disabled, and a high-impedance state exists between the A and B ports.
This device is fully specified for partial-power-down applications using Ioff. The Iofffeature ensures that damaging current will not backflow through the device when it is powered down. The device has isolation during power off.
Documents
Technical documentation and resources
