SN74AHCT541N
Active8MA 8 4.5V~5.5V 8MA 1 PDIP-20 BUFFERS, DRIVERS, RECEIVERS, TRANSCEIVERS ROHS
Deep-Dive with AI
Search across all available documentation for this part.
SN74AHCT541N
Active8MA 8 4.5V~5.5V 8MA 1 PDIP-20 BUFFERS, DRIVERS, RECEIVERS, TRANSCEIVERS ROHS
Technical Specifications
Parameters and characteristics for this part
| Specification | SN74AHCT541N |
|---|---|
| Current - Output High, Low [custom] | 8 mA |
| Current - Output High, Low [custom] | 8 mA |
| Logic Type | Buffer, Non-Inverting |
| Mounting Type | Through Hole |
| Number of Bits per Element | 8 |
| Number of Elements | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | 3-State |
| Package / Case | 20-DIP |
| Package / Case | 7.62 mm |
| Package / Case | 0.3 in |
| Supplier Device Package | 20-PDIP |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 4.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Tube | 1 | $ 0.87 | |
| 20 | $ 0.76 | |||
| 40 | $ 0.72 | |||
| 100 | $ 0.59 | |||
| 260 | $ 0.54 | |||
| 500 | $ 0.46 | |||
| 1000 | $ 0.37 | |||
| 2500 | $ 0.34 | |||
| 5000 | $ 0.31 | |||
| LCSC | Piece | 1 | $ 0.25 | |
| 200 | $ 0.10 | |||
| 500 | $ 0.10 | |||
| 1000 | $ 0.09 | |||
| Texas Instruments | TUBE | 1 | $ 0.81 | |
| 100 | $ 0.55 | |||
| 250 | $ 0.42 | |||
| 1000 | $ 0.28 | |||
Description
General part information
SN74AHCT541-EP Series
The SN74AHCT541 octal buffer/driver is ideal for driving bus lines or buffer memory address registers. This device features inputs and outputs on opposite sides of the package to facilitate printed circuit board layout.
The 3-state control gate is a 2-input AND gate with active-low inputs so that if either output-enable (OE1\ or OE2\) input is high, all corresponding outputs are in the high-impedance state. The outputs provide noninverted data when they are not in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Documents
Technical documentation and resources
