
LP3982ILDX-1.8/NOPB
Active300-MA, HIGH-ACCURACY, LOW-DROPOUT VOLTAGE REGULATOR WITH POWER GOOD & ENABLE
Deep-Dive with AI
Search across all available documentation for this part.

LP3982ILDX-1.8/NOPB
Active300-MA, HIGH-ACCURACY, LOW-DROPOUT VOLTAGE REGULATOR WITH POWER GOOD & ENABLE
Technical Specifications
Parameters and characteristics for this part
| Specification | LP3982ILDX-1.8/NOPB |
|---|---|
| Control Features | Enable |
| Current - Output | 300 mA |
| Current - Quiescent (Iq) | 270 µA |
| Mounting Type | Surface Mount |
| Number of Regulators | 1 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Positive |
| Output Type | 1.81 mOhm |
| Package / Case | 8-WFDFN Exposed Pad |
| Protection Features | Over Temperature, Reverse Polarity, Over Current |
| Supplier Device Package | 8-WSON (3x2.5) |
| Voltage - Input (Max) [Max] | 6 V |
| Voltage - Output (Min/Fixed) | 1.8 V |
| Voltage Dropout (Max) [Max] | 0.22 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 0.81 | |
| 10 | $ 0.71 | |||
| 25 | $ 0.67 | |||
| 100 | $ 0.54 | |||
| 250 | $ 0.51 | |||
| 500 | $ 0.43 | |||
| 1000 | $ 0.34 | |||
| Digi-Reel® | 1 | $ 0.81 | ||
| 10 | $ 0.71 | |||
| 25 | $ 0.67 | |||
| 100 | $ 0.54 | |||
| 250 | $ 0.51 | |||
| 500 | $ 0.43 | |||
| 1000 | $ 0.34 | |||
| Tape & Reel (TR) | 4500 | $ 0.20 | ||
| Texas Instruments | LARGE T&R | 1 | $ 0.47 | |
| 100 | $ 0.32 | |||
| 250 | $ 0.24 | |||
| 1000 | $ 0.16 | |||
Description
General part information
LP3982 Series
The LP3982 low-dropout (LDO) CMOS linear regulator is available in 1.8-V, 2.5-V, 2.82-V, 3-V,3.3-V, and adjustable versions. They deliver 300 mA of output current. Packaged in an 8-pin VSSOP, the LP3982 is pin- and package-compatible with Maxim’s MAX8860. The LM3982 is also available in the small footprint WSON package.
The LP3982 suits battery-powered applications because of its shutdown mode (1 nA typical), low quiescent current (90 µA typical), and LDO voltage (120 mV typical). The low dropout voltage allows for more utilization of a battery’s available energy by operating closer to its end-of-life voltage. The LP3982 device’s PMOS output transistor consumes relatively no drive current compared to PNP LDO regulators.
This PMOS regulator is stable with small ceramic capacitive loads (2.2 µF typical).
Documents
Technical documentation and resources