TS3L110DR
Active3.3-V, 2:1 (SPDT), 4-CHANNEL 10/100 BASE-T LAN SWITCH
Deep-Dive with AI
Search across all available documentation for this part.
TS3L110DR
Active3.3-V, 2:1 (SPDT), 4-CHANNEL 10/100 BASE-T LAN SWITCH
Technical Specifications
Parameters and characteristics for this part
| Specification | TS3L110DR |
|---|---|
| -3db Bandwidth | 500 MHz |
| Applications | Networking |
| Features | 10/100 Base-T |
| Mounting Type | Surface Mount |
| Multiplexer/Demultiplexer Circuit | 2:1 |
| Number of Channels | 4 |
| On-State Resistance (Max) [Max] | 8 Ohm |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 16-SOIC |
| Package / Case [x] | 0.154 in |
| Package / Case [y] | 3.9 mm |
| Supplier Device Package | 16-SOIC |
| Switch Circuit | SPDT |
| Voltage - Supply, Single (V+) [Max] | 3.6 V |
| Voltage - Supply, Single (V+) [Min] | 3 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.60 | |
| 10 | $ 1.44 | |||
| 25 | $ 1.35 | |||
| 100 | $ 1.15 | |||
| 250 | $ 1.08 | |||
| 500 | $ 0.95 | |||
| 1000 | $ 0.78 | |||
| Digi-Reel® | 1 | $ 1.60 | ||
| 10 | $ 1.44 | |||
| 25 | $ 1.35 | |||
| 100 | $ 1.15 | |||
| 250 | $ 1.08 | |||
| 500 | $ 0.95 | |||
| 1000 | $ 0.78 | |||
| Tape & Reel (TR) | 2500 | $ 0.73 | ||
| 5000 | $ 0.70 | |||
| 12500 | $ 0.68 | |||
| Texas Instruments | LARGE T&R | 1 | $ 1.20 | |
| 100 | $ 0.99 | |||
| 250 | $ 0.71 | |||
| 1000 | $ 0.54 | |||
Description
General part information
TS3L110 Series
The TS3L110 local area network (LAN) switch is a 4-bit 1-of-2 multiplexer/demultiplexer with a single switch-enable (E) input. WhenEis low, the switch is enabled, and the I port is connected to the Y port. WhenEis high, the switch is disabled, and the high-impedance state exists between the I and Y ports. The select (S) input controls the data path of the multiplexer/demultiplexer.
The TS3L110 device can be used to replace mechanical relays in LAN applications. This device has low and flat ON-state resistance (ron), wide bandwidth, and low crosstalk, making it suitable for 10/100 Base-T and various other LAN applications. The TS3L110 device can be used to route signals from a 10/100 Base-T Ethernet transceiver to the RJ-45 LAN connectors in laptops or in docking stations. This device is designed for low channel-to-channel skew and low crosstalk.
This device is fully specified for partial-power-down applications using Ioff. The Iofffeature ensures that damaging current does not backflow through the device when it is powered down. The device has isolation during power off.
Documents
Technical documentation and resources
