LP5522TM/NOPB
Active1 20MA 2.7V~5.5V DSBGA-6 LED DRIVERS ROHS
Deep-Dive with AI
Search across all available documentation for this part.
LP5522TM/NOPB
Active1 20MA 2.7V~5.5V DSBGA-6 LED DRIVERS ROHS
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | LP5522TM/NOPB |
|---|---|
| Current - Output / Channel [custom] | 20 mA |
| Internal Switch(s) | True |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -30 °C |
| Package / Case | DSBGA, 6-WFBGA |
| Supplier Device Package | 6-DSBGA |
| Type | Linear |
| Voltage - Supply (Max) | 5.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.55 | |
| 10 | $ 1.38 | |||
| 25 | $ 1.31 | |||
| 100 | $ 1.08 | |||
| Digi-Reel® | 1 | $ 1.55 | ||
| 10 | $ 1.38 | |||
| 25 | $ 1.31 | |||
| 100 | $ 1.08 | |||
| Tape & Reel (TR) | 250 | $ 1.01 | ||
| 500 | $ 0.89 | |||
| 1250 | $ 0.70 | |||
| 2500 | $ 0.66 | |||
| 6250 | $ 0.62 | |||
| 12500 | $ 0.60 | |||
| LCSC | Piece | 1 | $ 1.06 | |
| 10 | $ 0.88 | |||
| 30 | $ 0.78 | |||
| 250 | $ 0.67 | |||
| Texas Instruments | SMALL T&R | 1 | $ 1.15 | |
| 100 | $ 0.88 | |||
| 250 | $ 0.65 | |||
| 1000 | $ 0.46 | |||
Description
General part information
LP5522 Series
The LP5522 is a simple single wire programmable LED controller in six bump DSBGA package. It provides constant current flow through high side driver. Output current can be set from 1 mA to 20 mA by using an external resistor on the ISET pin. If no external resistor is used, output current is set to 5 mA default current. The LP5522 is controlled using only one signal. The signal controls either directly the LED driver or it launches previously programmed blinking sequence.
The LP5522 works autonomously without a clock signal from the master device. Very low LED driver headroom voltage makes possible to use supply voltages close to LED forward voltage. Current consumption of the LP5522 is minimized when LED is turned off and once controller is disabled all supporting functions are also shut down. Very small DSBGA package together with minimum number of external components is a best fit for handheld devices.
The LP5522 is a simple single wire programmable LED controller in six bump DSBGA package. It provides constant current flow through high side driver. Output current can be set from 1 mA to 20 mA by using an external resistor on the ISET pin. If no external resistor is used, output current is set to 5 mA default current. The LP5522 is controlled using only one signal. The signal controls either directly the LED driver or it launches previously programmed blinking sequence.
Documents
Technical documentation and resources
