TPS22970YZPR
ActivePOWER SWITCH HI SIDE 1-OUT 4A 6.4MOHM 8-PIN DSBGA T/R
Deep-Dive with AI
Search across all available documentation for this part.
TPS22970YZPR
ActivePOWER SWITCH HI SIDE 1-OUT 4A 6.4MOHM 8-PIN DSBGA T/R
Technical Specifications
Parameters and characteristics for this part
| Specification | TPS22970YZPR |
|---|---|
| Current - Output (Max) [Max] | 4 A |
| Features | Slew Rate Controlled |
| Input Type | Non-Inverting |
| Interface | On/Off |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 105 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | High Side |
| Output Type | N-Channel |
| Package / Case | 8-XFBGA, DSBGA |
| Ratio - Input:Output [custom] | 1:1 |
| Rds On (Typ) | 4.7 mOhm |
| Supplier Device Package | 8-DSBGA |
| Switch Type | General Purpose |
| Voltage - Load [Max] | 3.6 V |
| Voltage - Load [Min] | 0.65 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 0.57 | |
| 10 | $ 0.48 | |||
| 25 | $ 0.45 | |||
| 100 | $ 0.36 | |||
| 250 | $ 0.34 | |||
| 500 | $ 0.28 | |||
| 1000 | $ 0.22 | |||
| Digi-Reel® | 1 | $ 0.57 | ||
| 10 | $ 0.48 | |||
| 25 | $ 0.45 | |||
| 100 | $ 0.36 | |||
| 250 | $ 0.34 | |||
| 500 | $ 0.28 | |||
| 1000 | $ 0.22 | |||
| Tape & Reel (TR) | 3000 | $ 0.20 | ||
| 6000 | $ 0.19 | |||
| 15000 | $ 0.17 | |||
| 30000 | $ 0.17 | |||
| Texas Instruments | LARGE T&R | 1 | $ 0.36 | |
| 100 | $ 0.24 | |||
| 250 | $ 0.19 | |||
| 1000 | $ 0.13 | |||
Description
General part information
TPS22970 Series
The TPS22970 is a small, space-saving load switch with controlled Turn-ON to reduce inrush current. The device contains an N-channel MOSFET that can operate over an input voltage range of 0.65 V to 3.6 V and pulsed switch currents up to 4 A. An integrated charge pump biases the NMOS switch in order to achieve a minimum switch ON resistance (RON). The switch is controlled by an on and off input (ON), which is capable of interfacing directly with low-voltage control signals.
The TPS22970 is capable of thermal shutdown when the junction temperature is above the threshold, turning the switch off. The switch turns on again when the junction temperature stabilizes to a safe range.
The TPS22970 has a 150-Ω on-chip resistor for quick discharge of the output when switch is disabled to avoid any unknown state caused by floating supply to the downstream load.
Documents
Technical documentation and resources