Specification	THS3110IDR

-3db Bandwidth	100 MHz
Amplifier Type	Current Feedback
Current - Input Bias	1.5 µA
Current - Output / Channel [custom]	260 mA
Current - Supply	4.8 mA
Mounting Type	Surface Mount
Number of Circuits	1
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Package / Case	8-SOIC
Package / Case [x]	0.154 in
Package / Case [y]	3.9 mm
Slew Rate	1300 V/µs
Supplier Device Package	8-SOIC
Voltage - Input Offset	3 mV
Voltage - Supply Span (Max) [Max]	30 V
Voltage - Supply Span (Min) [Min]	10 V

THS3110 Series

Single, Low Noise, High Voltage Current-Feedback Amplifier with Power-down

Part	Number of Circuits	Current - Output / Channel [custom]	Current - Input Bias	-3db Bandwidth	Mounting Type	Voltage - Supply Span (Max) [Max]	Amplifier Type	Voltage - Supply Span (Min) [Min]	Current - Supply	Supplier Device Package	Operating Temperature [Max]	Operating Temperature [Min]	Slew Rate	Package / Case	Package / Case [custom]	Voltage - Input Offset	Package / Case [y]	Package / Case [x]
Texas Instruments THS3110IDGN	1	260 mA	1.5 µA	100 MHz	Surface Mount	30 V	Current Feedback	10 V	4.8 mA	8-HVSSOP	85 °C	-40 °C	1300 V/µs	8-MSOP 8-TSSOP Exposed Pad	0.118 in 3 mm	3 mV
Texas Instruments THS3110IDR	1	260 mA	1.5 µA	100 MHz	Surface Mount	30 V	Current Feedback	10 V	4.8 mA	8-SOIC	85 °C	-40 °C	1300 V/µs	8-SOIC		3 mV	3.9 mm	0.154 in
Texas Instruments THS3110ID	1	260 mA	1.5 µA	100 MHz	Surface Mount	30 V	Current Feedback	10 V	4.8 mA	8-SOIC	85 °C	-40 °C	1300 V/µs	8-SOIC		3 mV	3.9 mm	0.154 in

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tape & Reel (TR)	2500	$ 2.80
Texas Instruments	LARGE T&R	1	$ 4.41
		100	$ 3.59
		250	$ 2.82
		1000	$ 2.39

Description

General part information

THS3110 Series

The THS3110 and THS3111 are low-noise, high-voltage, current-feedback amplifiers designed to operate over a wide supply range of ±5 V to ±15 V for today's high performance applications.

The THS3110 features a power-down pin (PD) that puts the amplifier in low-power standby mode, and lowers the quiescent current from 4.8 mA to 270 µA.

These amplifiers provide well-regulated ac performance characteristics. The unity-gain bandwidth of 100 MHz allows for good distortion characteristics below 10 MHz. Coupled with a high 1300-V/&mirco;s slew rate, the THS3110 and THS3111 amplifiers allow for high output voltage swings at high frequencies.

Documents

Technical documentation and resources

Low-Noise, High-Voltage, Current-Feedback Op Amplifiers datasheet (Rev. E)

Data sheet