BQ35100PWR
ActiveBATTERY FUEL GAUGE FOR NON-RECHARGEABLE BATTERIES (LITHIUM PRIMARY) AND END-OF-SERVICE MONITOR
Deep-Dive with AI
Search across all available documentation for this part.
BQ35100PWR
ActiveBATTERY FUEL GAUGE FOR NON-RECHARGEABLE BATTERIES (LITHIUM PRIMARY) AND END-OF-SERVICE MONITOR
Technical Specifications
Parameters and characteristics for this part
| Specification | BQ35100PWR |
|---|---|
| Battery Chemistry | Multi-Chemistry |
| Function | Battery Monitor |
| Interface | I2C |
| Mounting Type | Surface Mount |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 14-TSSOP |
| Package / Case [custom] | 0.173 " |
| Package / Case [custom] | 4.4 mm |
| Supplier Device Package | 14-TSSOP |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 3.34 | |
| 10 | $ 3.00 | |||
| 25 | $ 2.83 | |||
| 100 | $ 2.46 | |||
| 250 | $ 2.33 | |||
| 500 | $ 2.09 | |||
| 1000 | $ 1.76 | |||
| Digi-Reel® | 1 | $ 3.34 | ||
| 10 | $ 3.00 | |||
| 25 | $ 2.83 | |||
| 100 | $ 2.46 | |||
| 250 | $ 2.33 | |||
| 500 | $ 2.09 | |||
| 1000 | $ 1.76 | |||
| Tape & Reel (TR) | 2000 | $ 1.68 | ||
| 6000 | $ 1.61 | |||
| Texas Instruments | LARGE T&R | 1 | $ 2.52 | |
| 100 | $ 2.21 | |||
| 250 | $ 1.55 | |||
| 1000 | $ 1.25 | |||
Description
General part information
BQ35100 Series
The BQ35100 Battery Fuel Gauge and End-Of-Service Monitor provides highly configurable fuel gauging for non-rechargeable (primary) lithium batteries without requiring a forced discharge of the battery. Built so that optimization is not necessary to achieve accurate gauging, the BQ35100 device uses patented TI gauging algorithms to support the option to seamlessly replace an old battery with a new one.
The BQ35100 device provides accurate results with ultra-low average power consumption where less than 2 µA can be achieved through host control via the GAUGE ENABLE (GE) pin. The device is only required to be powered long enough, at a system-determined update frequency, to gather data and to make calculations to support the selected algorithm. A typical system may need to only be updated once every 8 hours as the gauge is not required to be powered to measure all discharge activity.
The fuel gauging functions use voltage, current, and temperature measurements to provide state-of-health (SOH) data and end-of-service (EOS) warning information where the host can read the gathered data through a 400-kHz I2C bus. An ALERT output, based on a variety of configurable status and data options, is also available to interrupt the host.
Documents
Technical documentation and resources