SN74ABTE16246DGGR
Active11-BIT INCIDENT-WAVE SWITCHING BUS TRANSCEIVERS WITH 3-STATE AND OPEN-COLLECTOR OUTPUTS
Deep-Dive with AI
Search across all available documentation for this part.
SN74ABTE16246DGGR
Active11-BIT INCIDENT-WAVE SWITCHING BUS TRANSCEIVERS WITH 3-STATE AND OPEN-COLLECTOR OUTPUTS
Technical Specifications
Parameters and characteristics for this part
| Specification | SN74ABTE16246DGGR |
|---|---|
| Logic Type | Incident-Wave Switching Bus Transceivers |
| Mounting Type | Surface Mount |
| Number of Bits | 11 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Package / Case | 48-TFSOP |
| Package / Case | 0.24 in |
| Package / Case [custom] | 6.1 mm |
| Supplier Device Package | 48-TSSOP |
| Supply Voltage [Max] | 5.5 V |
| Supply Voltage [Min] | 4.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 11.53 | |
| 10 | $ 10.59 | |||
| 25 | $ 10.16 | |||
| 100 | $ 8.95 | |||
| 250 | $ 8.51 | |||
| 500 | $ 7.96 | |||
| 1000 | $ 7.30 | |||
| Digi-Reel® | 1 | $ 11.53 | ||
| 10 | $ 10.59 | |||
| 25 | $ 10.16 | |||
| 100 | $ 8.95 | |||
| 250 | $ 8.51 | |||
| 500 | $ 7.96 | |||
| 1000 | $ 7.30 | |||
| Tape & Reel (TR) | 2000 | $ 7.03 | ||
| Texas Instruments | LARGE T&R | 1 | $ 9.02 | |
| 100 | $ 7.88 | |||
| 250 | $ 6.08 | |||
| 1000 | $ 5.43 | |||
Description
General part information
SN74ABTE16246 Series
The SN74ABTE16246 is an 11-bit noninverting transceiver designed for asynchronous two-way communication between buses. This device has open-collector and 3-state outputs. The device allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\ input can be used to disable the device so that the buses are effectively isolated. When OE\ is low, the device is active.
The B port has an equivalent 25-series output resistor to reduce ringing. Active bus-hold inputs on the B port hold unused or floating inputs at a valid logic level.
The A port provides for the precharging of the outputs via VCCBIAS, which establishes a voltage between 1.3 V and 1.7 V when VCCis not connected.
Documents
Technical documentation and resources
