Specification	SN74CBTK6800PWR

Circuit	10
Circuit	1:1
Independent Circuits	1
Mounting Type	Surface Mount
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Package / Case	24-TSSOP
Package / Case	0.173 in, 4.4 mm
Supplier Device Package	24-TSSOP
Type	Bus Switch
Voltage - Supply [Max]	5.5 V
Voltage - Supply [Min]	4.5 V
Voltage Supply Source	Single Supply

SN74CBTK6800 Series

5-V, 1:1 (SPST), 10-channel general-purpose FET bus switch with active-clamp undershoot protection

Part	Circuit	Circuit	Operating Temperature [Max]	Operating Temperature [Min]	Independent Circuits	Package / Case	Package / Case [custom]	Voltage - Supply [Min]	Voltage - Supply [Max]	Mounting Type	Type	Supplier Device Package	Voltage Supply Source	Package / Case
Texas Instruments SN74CBTK6800DBQR	10	1:1	85 °C	-40 °C	1	24-SSOP	0.154 " 3.9 mm	4.5 V	5.5 V	Surface Mount	Bus Switch	24-SSOP	Single Supply
Texas Instruments SN74CBTK6800PWR	10	1:1	85 °C	-40 °C	1	24-TSSOP		4.5 V	5.5 V	Surface Mount	Bus Switch	24-TSSOP	Single Supply	0.173 in 4.4 mm
Texas Instruments SN74CBTK6800GVR
Texas Instruments SN74CBTK6800PW	10	1:1	85 °C	-40 °C	1	24-TSSOP		4.5 V	5.5 V	Surface Mount	Bus Switch	24-TSSOP	Single Supply	0.173 in 4.4 mm

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Texas Instruments	LARGE T&R	1	$ 2.50
		100	$ 2.19
		250	$ 1.54
		1000	$ 1.24

Description

General part information

SN74CBTK6800 Series

The SN74CBTK6800 device provides ten bits of high-speed TTL-compatible bus switching. The low on-state resistance of the switch allows bidirectional connections to be made while adding near-zero propagation delay. The device also precharges the B port to a user-selectable bias voltage (BIASV) to minimize live-insertion noise.

The A and B ports have an active-clamp undershoot-protection circuit. When there is an undershoot, the active-clamp circuit is enabled and current from VCCis supplied to clamp the output, preventing the pass transistor from turning on.

The SN74CBTK6800 is organized as one 10-bit switch with a single enable (ON\) input. When ON\ is low, the switch is on, and port A is connected to port B. When ON\ is high, the switch between port A and port B is open. When ON\ is high or VCCis 0 V, B port is precharged to BIASV through the equivalent of a 10-kresistor.

Documents

Technical documentation and resources

10-Bit FET Bus Switch W/ Precharged Outputs and Active-Clamp Undershoot-Prot.Ckt datasheet (Rev. B)

Data sheet