Deep-Dive with AI
Search across all available documentation for this part.
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | LM111WGLQMLV |
|---|---|
| Current - Input Bias (Max) | 0.1 µA |
| Current - Quiescent (Max) [Max] | 6 mA, 5 mA |
| Mounting Type | Surface Mount |
| Number of Elements | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -55 °C |
| Output Type | Open-Collector |
| Package / Case | 10-CSOIC |
| Package / Case [x] | 0.241 in |
| Package / Case [y] | 6.12 mm |
| Propagation Delay (Max) [Max] | 200 ns |
| Supplier Device Package | 10-CFP |
| Type | General Purpose |
| Voltage - Input Offset (Max) [Max] | 3 mV |
| Voltage - Supply, Single/Dual (±) [Max] | 15 V, 30 V |
| Voltage - Supply, Single/Dual (±) [Min] | -2.5 V, 5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Texas Instruments | JEDEC TRAY (5+1) | 1 | $ 399.21 | |
| 10 | $ 365.94 | |||
| 100 | $ 332.67 | |||
Description
General part information
LM111QML-SP Series
The LM111 is a voltage comparator that has input currents nearly a thousand times lower than devices such as the LM106 or LM710. It is also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. The output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, it can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Both the inputs and the output of the LM111 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire OR'ed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the device is also much less prone to spurious oscillations. The LM111 has the same pin configuration as the LM106 and LM710.
The LM111 is a voltage comparator that has input currents nearly a thousand times lower than devices such as the LM106 or LM710. It is also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. The output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, it can drive lamps or relays, switching voltages up to 50V at currents as high as 50 mA.
Documents
Technical documentation and resources
