TLV9004IPWR
ActiveQUAD, 5.5-V, 1-MHZ, RRIO OPERATIONAL AMPLIFIER FOR COST-OPTIMIZED APPLICATIONS
Deep-Dive with AI
Search across all available documentation for this part.
TLV9004IPWR
ActiveQUAD, 5.5-V, 1-MHZ, RRIO OPERATIONAL AMPLIFIER FOR COST-OPTIMIZED APPLICATIONS
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TLV9004IPWR |
|---|---|
| Amplifier Type | General Purpose |
| Current - Input Bias | 5 pA |
| Current - Output / Channel [custom] | 40 mA |
| Current - Supply | 60 µA |
| Gain Bandwidth Product | 1 MHz |
| Mounting Type | Surface Mount |
| Number of Circuits | 4 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | Rail-to-Rail |
| Package / Case | 14-TSSOP |
| Package / Case [custom] | 0.173 " |
| Package / Case [custom] | 4.4 mm |
| Slew Rate | 2 V/µs |
| Supplier Device Package | 14-TSSOP |
| Voltage - Input Offset | 400 µV |
| Voltage - Supply Span (Max) [Max] | 5.5 V |
| Voltage - Supply Span (Min) [Min] | 1.8 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.12 | |
| 10 | $ 0.70 | |||
| 25 | $ 0.59 | |||
| 100 | $ 0.46 | |||
| 250 | $ 0.40 | |||
| 500 | $ 0.36 | |||
| 1000 | $ 0.33 | |||
| Digi-Reel® | 1 | $ 1.12 | ||
| 10 | $ 0.70 | |||
| 25 | $ 0.59 | |||
| 100 | $ 0.46 | |||
| 250 | $ 0.40 | |||
| 500 | $ 0.36 | |||
| 1000 | $ 0.33 | |||
| Tape & Reel (TR) | 2000 | $ 0.30 | ||
| 4000 | $ 0.28 | |||
| 6000 | $ 0.27 | |||
| 10000 | $ 0.26 | |||
| 14000 | $ 0.25 | |||
| 20000 | $ 0.24 | |||
| Texas Instruments | LARGE T&R | 1 | $ 0.52 | |
| 100 | $ 0.35 | |||
| 250 | $ 0.27 | |||
| 1000 | $ 0.18 | |||
Description
General part information
TLV9004 Series
The TLV900x family includes single (TLV9001), dual (TLV9002), and quad-channel (TLV9004) low-voltage (1.8 V to 5.5 V) operational amplifiers (op amps) with rail-to-rail input and output swing capabilities. These op amps provide a cost-effective solution for space-constrained applications such as smoke detectors, wearable electronics, and small appliances where low-voltage operation and high capacitive-load drive are required. The capacitive-load drive of the TLV900x family is 500 pF, and the resistive open-loop output impedance makes stabilization easier with much higher capacitive loads. These op amps are designed specifically for low-voltage operation (1.8 V to 5.5 V) with performance specifications similar to the TLV600x devices.
The robust design of the TLV900x family simplifies circuit design. The op amps feature unity-gain stability, an integrated RFI and EMI rejection filter, and no-phase reversal in overdrive conditions.
The TLV900x devices include a shutdown mode (TLV9001S, TLV9002S, and TLV9004S) that allow the amplifiers to switch off into standby mode with typical current consumption less than 1 µA.
Documents
Technical documentation and resources
