OPA170AIDBVT
ActiveOP AMP SINGLE LOW POWER AMPLIFIER R-R O/P ±18V/36V 5-PIN SOT-23 T/R
Deep-Dive with AI
Search across all available documentation for this part.
OPA170AIDBVT
ActiveOP AMP SINGLE LOW POWER AMPLIFIER R-R O/P ±18V/36V 5-PIN SOT-23 T/R
Technical Specifications
Parameters and characteristics for this part
| Specification | OPA170AIDBVT |
|---|---|
| Amplifier Type | General Purpose |
| Current - Input Bias | 8 pA |
| Current - Output / Channel | 17 mA |
| Current - Supply | 110 µA |
| Gain Bandwidth Product | 1.2 MHz |
| Mounting Type | Surface Mount |
| Number of Circuits | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | Rail-to-Rail |
| Package / Case | SC-74A, SOT-753 |
| Slew Rate | 0.4 V/µs |
| Supplier Device Package | SOT-23-5 |
| Voltage - Input Offset | 250 çV |
| Voltage - Supply Span (Max) [Max] | 36 V |
| Voltage - Supply Span (Min) [Min] | 2.7 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Arrow | N/A | 1 | $ 1.37 | |
| 10 | $ 1.00 | |||
| 50 | $ 0.91 | |||
| 100 | $ 0.81 | |||
| 200 | $ 0.81 | |||
| Digikey | Cut Tape (CT) | 1 | $ 1.57 | |
| 10 | $ 1.41 | |||
| 25 | $ 1.33 | |||
| 100 | $ 1.14 | |||
| Digi-Reel® | 1 | $ 1.57 | ||
| 10 | $ 1.41 | |||
| 25 | $ 1.33 | |||
| 100 | $ 1.14 | |||
| Tape & Reel (TR) | 250 | $ 1.07 | ||
| 500 | $ 0.93 | |||
| 1250 | $ 0.77 | |||
| 2500 | $ 0.72 | |||
| 6250 | $ 0.69 | |||
| 12500 | $ 0.67 | |||
| Newark | Each (Supplied on Cut Tape) | 1 | $ 1.55 | |
| 1 | $ 1.55 | |||
| 10 | $ 1.03 | |||
| 10 | $ 1.03 | |||
| 25 | $ 0.99 | |||
| 25 | $ 0.99 | |||
| 50 | $ 0.95 | |||
| 50 | $ 0.95 | |||
| 100 | $ 0.91 | |||
| 100 | $ 0.91 | |||
| 250 | $ 0.86 | |||
| 250 | $ 0.86 | |||
| 500 | $ 0.81 | |||
| 500 | $ 0.81 | |||
| 1000 | $ 0.78 | |||
| 1000 | $ 0.78 | |||
| Texas Instruments | SMALL T&R | 1 | $ 1.30 | |
| 100 | $ 1.00 | |||
| 250 | $ 0.74 | |||
| 1000 | $ 0.53 | |||
Description
General part information
OPA170-Q1 Series
The OPA170, OPA2170, and OPA4170 devices (OPAx170) are a family of 36-V, single-supply, low-noise operational amplifiers (op amps) that feature micro packages with the ability to operate on supplies ranging from 2.7 V (±1.35 V) to 36 V (±18 V). They offer good offset, drift, and bandwidth with low quiescent current. The single, dual, and quad versions all have identical specifications for maximum design flexibility.
Unlike most op amps, which are specified at only one supply voltage, the OPAx170 family of op amps is specified from 2.7 V to 36 V. Input signals beyond the supply rails do not cause phase reversal. The OPAx170 family is stable with capacitive loads up to 300 pF. The input can operate 100 mV below the negative rail and within 2 V of the positive rail for normal operation. Note that these devices can operate with full rail-to-rail input 100 mV beyond the positive rail, but with reduced performance within 2 V of the positive rail. The OPAx170 op amps are specified from –40°C to +125°C.
The OPA170, OPA2170, and OPA4170 devices (OPAx170) are a family of 36-V, single-supply, low-noise operational amplifiers (op amps) that feature micro packages with the ability to operate on supplies ranging from 2.7 V (±1.35 V) to 36 V (±18 V). They offer good offset, drift, and bandwidth with low quiescent current. The single, dual, and quad versions all have identical specifications for maximum design flexibility.
Documents
Technical documentation and resources
