Specification	NLSX3014MUTAG

Channel Type	Bidirectional
Channels per Circuit	4
Data Rate	100 Mbps
Features	Auto-Direction Sensing
Mounting Type	Surface Mount
Number of Circuits	1
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Output Type	Tri-State, Non-Inverted
Package / Case	12-UFQFN
Supplier Device Package	12-UQFN
Supplier Device Package [x]	1.7
Supplier Device Package [y]	2
Translator Type	Voltage Level
Voltage - VCCA [Max]	4.5 V
Voltage - VCCA [Min]	0.9 V
Voltage - VCCB [Max]	4.5 V
Voltage - VCCB [Min]	1.3 V

NLSX3014 Series

Level Translator, 4-Bit, Configurable Dual-Supply, 100 Mbps

Part	Voltage - VCCA [Max]	Voltage - VCCA [Min]	Channels per Circuit	Features	Mounting Type	Supplier Device Package	Supplier Device Package [y]	Supplier Device Package [x]	Voltage - VCCB [Max]	Voltage - VCCB [Min]	Operating Temperature [Max]	Operating Temperature [Min]	Output Type	Channel Type	Data Rate	Package / Case	Number of Circuits	Translator Type
ON Semiconductor NLSX3014MUTAG	4.5 V	0.9 V	4	Auto-Direction Sensing	Surface Mount	12-UQFN	2	1.7	4.5 V	1.3 V	85 °C	-40 °C	Non-Inverted Tri-State	Bidirectional	100 Mbps	12-UFQFN	1	Voltage Level

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 2.46
		10	$ 2.21
		25	$ 2.08
		100	$ 1.67
		250	$ 1.46
		500	$ 1.42
		1000	$ 1.12
	Digi-Reel®	1	$ 2.46
		10	$ 2.21
		25	$ 2.08
		100	$ 1.67
		250	$ 1.46
		500	$ 1.42
		1000	$ 1.12
	Tape & Reel (TR)	3000	$ 1.08
		6000	$ 1.04

Description

General part information

NLSX3014 Series

The NLSX3014 is a 4 bit configurable dual supply bidirectional level translator without a directional control pin. The IO_VCCand IO_VLports are designed to track two different power supply rails, VCCand VLrespectively. The VCCsupply rail is configurable from 1.3V to 4.5V while the VLsupply rail is configurable from 0.9V to VCCminus 0.4V. This allows lower voltage logic signals on the VLside to be translated into higher voltage logic signals on the VCCside, and vice versa. Both IO ports are auto sensing and thus, have no direction pin. The Enable EN input, when Low, disables both IO ports by putting them in 3 state. This reduces significantly the supply currents from both VCCand VL. The EN signal is designed to track VL.