TPS22912CYZVR
Active5.5-V, 2-A, 60-MΩ LOAD SWITCH WITH ACTIVE HIGH ENABLE
Deep-Dive with AI
Search across all available documentation for this part.
TPS22912CYZVR
Active5.5-V, 2-A, 60-MΩ LOAD SWITCH WITH ACTIVE HIGH ENABLE
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | TPS22912CYZVR |
|---|---|
| Current - Output (Max) [Max] | 2 A |
| Fault Protection | Reverse Current, UVLO |
| Features | Slew Rate Controlled |
| Input Type | Non-Inverting |
| Interface | On/Off |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | High Side |
| Output Type | P-Channel |
| Package / Case | DSBGA, 4-XFBGA |
| Ratio - Input:Output [custom] | 1:1 |
| Rds On (Typ) | 60 mOhm |
| Supplier Device Package | 4-DSBGA (0.88x0.88) |
| Switch Type | General Purpose |
| Voltage - Load [Max] | 5.5 V |
| Voltage - Load [Min] | 1.4 V |
| Voltage - Supply (Vcc/Vdd) | False |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 0.72 | |
| 10 | $ 0.63 | |||
| 25 | $ 0.60 | |||
| 100 | $ 0.49 | |||
| 250 | $ 0.45 | |||
| 500 | $ 0.38 | |||
| 1000 | $ 0.31 | |||
| Digi-Reel® | 1 | $ 0.72 | ||
| 10 | $ 0.63 | |||
| 25 | $ 0.60 | |||
| 100 | $ 0.49 | |||
| 250 | $ 0.45 | |||
| 500 | $ 0.38 | |||
| 1000 | $ 0.31 | |||
| Tape & Reel (TR) | 3000 | $ 0.28 | ||
| 6000 | $ 0.26 | |||
| 15000 | $ 0.25 | |||
| 30000 | $ 0.24 | |||
| Texas Instruments | LARGE T&R | 1 | $ 0.52 | |
| 100 | $ 0.35 | |||
| 250 | $ 0.27 | |||
| 1000 | $ 0.18 | |||
Description
General part information
TPS22912C Series
The TPS22910A, TPS22912C, and TPS22913B/C are small, low rONload switches with controlled turn on. The device contains a P-channel MOSFET that can operate over an input voltage range of 1.4 V to 5.5 V. The switch is controlled by an on/off input (ON), which is capable of interfacing directly with low-voltage GPIO control signals.
The TPS22910A, TPS22912C, and TPS22913B/C devices provide reverse current protection in ON and OFF states. An internal reverse voltage comparator disables the power-switch when the output voltage (VOUT) is driven higher than the input voltage (VIN), by VRCP, to quickly (10 µs typ) stop the flow of current towards the input side of the switch. Reverse current protection is always active, even when the power-switch is disabled. Additionally, under-voltage lockout (UVLO) protection turns the switch off if the input voltage is too low.
The TPS22913B/C contains a 150-Ω on-chip load resistor for quick output discharge when the switch is turned off.
Documents
Technical documentation and resources