
CS8129YTHA5G
Obsolete750 MA LDO LINEAR VOLTAGE REGULATOR WITH DELAY AND RESET
Deep-Dive with AI
Search across all available documentation for this part.

CS8129YTHA5G
Obsolete750 MA LDO LINEAR VOLTAGE REGULATOR WITH DELAY AND RESET
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | CS8129YTHA5G |
|---|---|
| Control Features | Reset |
| Current - Output | 750 mA |
| Current - Quiescent (Iq) | 70 mA |
| Current - Supply (Max) [Max] | 100 mA |
| Mounting Type | Through Hole |
| Number of Regulators | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | Positive |
| Output Type | 1.81 mOhm |
| Package / Case | TO-220-5 Formed Leads |
| Protection Features | Reverse Polarity, Over Temperature, Short Circuit |
| PSRR | 75 dB |
| Supplier Device Package | TO-220-5 Horizontal |
| Voltage - Input (Max) [Max] | 26 V |
| Voltage - Output (Min/Fixed) | 5 V |
| Voltage Dropout (Max) [Max] | 0.6 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
Description
General part information
CS8129 Series
The CS8129 is a precision 5V linear regulator capable of sourcing 750mA. The RESETbar threshold voltage has been lowered to 4.2V so that the regulator can be used with 4V microprocessors. The lower RESETbar threshold also permits operation under low battery conditions (5.5V plus a diode). The RESETbar's delay time is externally programmed using a discrete RC network. During power up, or when the output goes out of regulation, RESETbar remains in the low state for the duration of the delay. This function is independent of the input voltage and will function correctly as long as the output voltage remains at or above 1V. Hysteresis is included in the Delay and the RESETbar comparators to improve noise immunity. A latching discharge circuit is used to discharge the delay capacitor when it is triggered by a brief fault condition.The regulator is protected against a variety of fault conditions: i.e. reverse battery, overvoltage, short circuit and thermal runaway conditions. The regulator is protected against voltage transients ranging from -50V to +40V. Short circuit current is limited to 1.2A (typ).
Documents
Technical documentation and resources