Specification	TRS213IDB

Data Rate	120 Kbps
Duplex	Full
Mounting Type	Surface Mount
Number of Drivers/Receivers [custom]	5
Number of Drivers/Receivers [custom]	4
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Package / Case	28-SSOP
Package / Case [custom]	0.209 in
Package / Case [custom]	5.3 mm
Protocol	RS232
Receiver Hysteresis	500 mV
Supplier Device Package	28-SSOP
Type	Transceiver
Voltage - Supply [Max]	5.5 V
Voltage - Supply [Min]	4.5 V

TRS213 Series

Part	Duplex	Supplier Device Package	Voltage - Supply [Min]	Voltage - Supply [Max]	Receiver Hysteresis	Mounting Type	Operating Temperature [Max]	Operating Temperature [Min]	Number of Drivers/Receivers [custom]	Number of Drivers/Receivers [custom]	Type	Data Rate	Package / Case [custom]	Package / Case	Package / Case [custom]	Protocol	Package / Case [x]	Package / Case [y]
Texas Instruments TRS213CDBR	Full	28-SSOP	4.5 V	5.5 V	500 mV	Surface Mount	70 °C	0 °C	5	4	Transceiver	120 Kbps	0.209 in	28-SSOP	5.3 mm	RS232
Texas Instruments TRS213IDB	Full	28-SSOP	4.5 V	5.5 V	500 mV	Surface Mount	85 °C	-40 °C	5	4	Transceiver	120 Kbps	0.209 in	28-SSOP	5.3 mm	RS232
Texas Instruments TRS213CDWG4	Full	28-SOIC	4.5 V	5.5 V	500 mV	Surface Mount	70 °C	0 °C	5	4	Transceiver	120 Kbps		28-SOIC		RS232	0.295 in	7.5 mm
Texas Instruments TRS213CDW	Full	28-SOIC	4.5 V	5.5 V	500 mV	Surface Mount	70 °C	0 °C	5	4	Transceiver	120 Kbps		28-SOIC		RS232	0.295 in	7.5 mm
Texas Instruments TRS213CDBG4	Full	28-SSOP	4.5 V	5.5 V	500 mV	Surface Mount	70 °C	0 °C	5	4	Transceiver	120 Kbps	0.209 in	28-SSOP	5.3 mm	RS232
Texas Instruments TRS213CDWR	Full	28-SOIC	4.5 V	5.5 V	500 mV	Surface Mount	70 °C	0 °C	5	4	Transceiver	120 Kbps		28-SOIC		RS232	0.295 in	7.5 mm
Texas Instruments TRS213IDBR	Full	28-SSOP	4.5 V	5.5 V	500 mV	Surface Mount	85 °C	-40 °C	5	4	Transceiver	120 Kbps	0.209 in	28-SSOP	5.3 mm	RS232

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tube	1	$ 2.33
		10	$ 2.10
		50	$ 1.98
		100	$ 1.68
		250	$ 1.58
		500	$ 1.38
		1000	$ 1.15
		2500	$ 1.07
Texas Instruments	TUBE	1	$ 1.75
		100	$ 1.45
		250	$ 1.04
		1000	$ 0.78

Description

General part information

TRS213 Series

The TRS213 device consists of four line drivers, five line receivers, and a dual charge-pump circuit with ±15kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 5V supply. The devices operate at data signaling rates up to 120kbit/s and a maximum of 30V/µs driver output slew rate.

The TRS213 has an active-low shutdown ( SHDN) and an active-high enable control (EN). In shutdown mode, the charge pumps are turned off, V+ is pulled down to VCC, V– is pulled to GND, and the transmitter outputs are disabled. This reduces supply current typically to 1µA. Two receivers of the TRS213 are active during shutdown.