Specification	SN74ALVCH245PW

Current - Output High, Low	24 mA
Mounting Type	Surface Mount
Number of Bits per Element	8
Number of Elements	1
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Output Type	3-State
Package / Case	20-TSSOP
Package / Case [x]	0.173 in
Package / Case [y]	4.4 mm
Supplier Device Package	20-TSSOP
Voltage - Supply [Max]	3.6 V
Voltage - Supply [Min]	1.65 V

SN74ALVCH245 Series

Octal Bus Transceiver With 3-State Outputs

Part	Supplier Device Package	Package / Case	Package / Case [y]	Package / Case [y]	Mounting Type	Current - Output High, Low	Output Type	Operating Temperature [Max]	Operating Temperature [Min]	Number of Bits per Element	Number of Elements	Voltage - Supply [Min]	Voltage - Supply [Max]	Package / Case [x]	Package / Case	Package / Case
Texas Instruments SN74ALVCH245DW	20-SOIC	20-SOIC	0.295 in	7.5 mm	Surface Mount	24 mA	3-State	85 °C	-40 °C	8	1	1.65 V	3.6 V
Texas Instruments SN74ALVCH245PWR	20-TSSOP	20-TSSOP	4.4 mm		Surface Mount	24 mA	3-State	85 °C	-40 °C	8	1	1.65 V	3.6 V	0.173 in
Texas Instruments SN74ALVCH245NSR	20-SO	20-SOIC			Surface Mount	24 mA	3-State	85 °C	-40 °C	8	1	1.65 V	3.6 V		0.209 "	5.3 mm
Texas Instruments SN74ALVCH245DWR	20-SOIC	20-SOIC	0.295 in	7.5 mm	Surface Mount	24 mA	3-State	85 °C	-40 °C	8	1	1.65 V	3.6 V
Texas Instruments SN74ALVCH245PW	20-TSSOP	20-TSSOP	4.4 mm		Surface Mount	24 mA	3-State	85 °C	-40 °C	8	1	1.65 V	3.6 V	0.173 in

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Tube	1	$ 0.96
		10	$ 0.85
		70	$ 0.81
		140	$ 0.67
		280	$ 0.62
		560	$ 0.55
		1050	$ 0.43
		2520	$ 0.41
		5040	$ 0.39
Texas Instruments	TUBE	1	$ 0.71
		100	$ 0.55
		250	$ 0.40
		1000	$ 0.29

Description

General part information

SN74ALVCH245 Series

This octal bus transceiver is designed for 1.65-V to 3.6-V VCCoperation.

The SN74ALVCH245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\ input can be used to disable the device so the buses are effectively isolated.

To ensure the high-impedance state during power up or power down, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.