SN74ALS191ADR
ActiveCOUNTER SINGLE 4-BIT ASYNC BINARY UP/DOWN 16-PIN SOIC T/R
Deep-Dive with AI
Search across all available documentation for this part.
SN74ALS191ADR
ActiveCOUNTER SINGLE 4-BIT ASYNC BINARY UP/DOWN 16-PIN SOIC T/R
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | SN74ALS191ADR |
|---|---|
| Count Rate | 30 MHz |
| Direction | Up, Down |
| Logic Type | Binary Counter |
| Mounting Type | Surface Mount |
| Number of Bits per Element | 4 |
| Number of Elements | 1 |
| Operating Temperature [Max] | 70 °C |
| Operating Temperature [Min] | 0 °C |
| Package / Case | 16-SOIC |
| Package / Case [x] | 0.154 in |
| Package / Case [y] | 3.9 mm |
| Supplier Device Package | 16-SOIC |
| Timing | Synchronous |
| Trigger Type | Positive Edge |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 4.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 2.91 | |
| Digi-Reel® | 1 | $ 2.91 | ||
| Tape & Reel (TR) | 2500 | $ 1.46 | ||
| 5000 | $ 1.41 | |||
| Texas Instruments | LARGE T&R | 1 | $ 2.52 | |
| 100 | $ 2.21 | |||
| 250 | $ 1.55 | |||
| 1000 | $ 1.25 | |||
Description
General part information
SN74ALS191A Series
The 'ALS191A are synchronous 4-bit reversible up/down binary counters. Synchronous counting operation is provided by having all flip-flops clocked simultaneously so that the outputs change coincidentally with each other when instructed by the steering logic. This mode of operation eliminates the output counting spikes normally associated with asynchronous (ripple-clock) counters.
The outputs of the four flip-flops are triggered on a low-to-high-level transition of the clock (CLK) input if the count enable () input is low. A high atinhibits counting. The direction of the count is determined by the level of the down/up (D/U\) input. When D/U\ is low, the counter counts up, and when D/U\ is high, the counter counts down.
These counters feature a fully independent clock circuit. Changes at the control inputs (and D/U\) that modify the operating mode have no effect on the contents of the counter until clocking occurs. The function of the counter is dictated solely by the conditions meeting the stable setup and hold times.
Documents
Technical documentation and resources
