TPS3620-33MDGKREP
ActiveENHANCED PRODUCT BACKUP-BATTERY SUPERVISORS FOR RAM RETENTION
Deep-Dive with AI
Search across all available documentation for this part.
TPS3620-33MDGKREP
ActiveENHANCED PRODUCT BACKUP-BATTERY SUPERVISORS FOR RAM RETENTION
Technical Specifications
Parameters and characteristics for this part
| Specification | TPS3620-33MDGKREP |
|---|---|
| Mounting Type | Surface Mount |
| Number of Voltages Monitored | 1 |
| Operating Temperature [Max] | 125 °C |
| Operating Temperature [Min] | -55 °C |
| Output | Totem Pole, Push-Pull |
| Package / Case | 8-MSOP, 8-TSSOP |
| Package / Case | 3 mm |
| Package / Case [custom] | 0.118 in |
| Reset | Active Low |
| Reset Timeout | 60 ms |
| Type | Battery Backup Circuit |
| Voltage - Threshold | 2.93 V |
TPS3620-33-EP Series
Enhanced Product Backup-Battery Supervisors For Ram Retention
| Part | Reset Timeout | Package / Case | Package / Case [custom] | Package / Case | Type | Mounting Type | Voltage - Threshold | Operating Temperature [Max] | Operating Temperature [Min] | Output | Number of Voltages Monitored | Reset | Operating Temperature [Max] | Operating Temperature [Min] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 Texas Instruments | 60 ms | 8-MSOP 8-TSSOP | 0.118 in | 3 mm | Battery Backup Circuit | Surface Mount | 2.93 V | 85 °C | -40 °C | Push-Pull Totem Pole | 1 | Active Low | ||
Texas Instruments | 60 ms | 8-MSOP 8-TSSOP | 0.118 in | 3 mm | Battery Backup Circuit | Surface Mount | 2.93 V | Push-Pull Totem Pole | 1 | Active Low | 125 °C | -55 °C | ||
Texas Instruments | 60 ms | 8-MSOP 8-TSSOP | 0.118 in | 3 mm | Battery Backup Circuit | Surface Mount | 4.55 V | 85 °C | -40 °C | Push-Pull Totem Pole | 1 | Active Low | ||
Texas Instruments | 60 ms | 8-MSOP 8-TSSOP | 0.118 in | 3 mm | Battery Backup Circuit | Surface Mount | 4.55 V | 85 °C | -40 °C | Push-Pull Totem Pole | 1 | Active Low | ||
Texas Instruments | 60 ms | 8-MSOP 8-TSSOP | 0.118 in | 3 mm | Battery Backup Circuit | Surface Mount | 2.93 V | 85 °C | -40 °C | Push-Pull Totem Pole | 1 | Active Low | ||
Texas Instruments | 60 ms | 8-MSOP 8-TSSOP | 0.118 in | 3 mm | Battery Backup Circuit | Surface Mount | 2.93 V | Push-Pull Totem Pole | 1 | Active Low | 125 °C | -55 °C |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 6.77 | |
| 10 | $ 6.12 | |||
| 25 | $ 5.83 | |||
| 100 | $ 5.07 | |||
| 250 | $ 4.84 | |||
| 500 | $ 4.41 | |||
| 1000 | $ 3.84 | |||
| Digi-Reel® | 1 | $ 6.77 | ||
| 10 | $ 6.12 | |||
| 25 | $ 5.83 | |||
| 100 | $ 5.07 | |||
| 250 | $ 4.84 | |||
| 500 | $ 4.41 | |||
| 1000 | $ 3.84 | |||
| Tape & Reel (TR) | 2500 | $ 3.70 | ||
| Texas Instruments | LARGE T&R | 1 | $ 5.96 | |
| 100 | $ 4.86 | |||
| 250 | $ 3.82 | |||
| 1000 | $ 3.24 | |||
Description
General part information
TPS3620-33-EP Series
The TPS3619 and TPS3620 families of supervisory circuits monitor and control processor activity by providing backup-battery switchover for data retention of CMOS RAM.
During power on,RESETis asserted when the supply voltage (VDDor VBAT) becomes higher than 1.1 V. Thereafter, the supply voltage supervisor monitors VDDand keepsRESEToutput active as long as VDDremains below the threshold voltage (VIT). An internal timer delays the return of the output to the inactive state (high) to ensure proper system reset. The delay time starts after VDDhas risen above VIT. When the supply voltage drops below VIT, the output becomes active (low) again.
The product spectrum is designed for supply voltages of 3.3 V and 5 V. The TPS3619 and TPS3620 are available in an 8-pin MSOP package and are characterized for operation over a temperature range of –55°C to 125°C.
Documents
Technical documentation and resources