TPS2541RTET
ActiveUSB CHARGING PORT CONTROLLER WITH OUTPUT DISCHARGE
Deep-Dive with AI
Search across all available documentation for this part.
TPS2541RTET
ActiveUSB CHARGING PORT CONTROLLER WITH OUTPUT DISCHARGE
Technical Specifications
Parameters and characteristics for this part
| Specification | TPS2541RTET |
|---|---|
| Current - Output (Max) [Max] | 2.5 A |
| Fault Protection | UVLO, Current Limiting (Adjustable), Over Temperature |
| Features | Load Discharge, Status Flag |
| Input Type | Non-Inverting |
| Interface | On/Off |
| Mounting Type | Surface Mount |
| Number of Outputs | 1 |
| Operating Temperature [Max] | 125 ¯C |
| Operating Temperature [Min] | -40 °C |
| Output Configuration | High Side |
| Output Type | N-Channel |
| Package / Case | 16-WFQFN Exposed Pad |
| Ratio - Input:Output [custom] | 1:1 |
| Rds On (Typ) | 73 mOhm |
| Supplier Device Package | 16-WQFN (3x3) |
| Switch Type | USB Switch |
| Voltage - Load [Max] | 5.5 V |
| Voltage - Load [Min] | 4.5 V |
| Voltage - Supply (Vcc/Vdd) | False |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 1.64 | |
| 10 | $ 1.47 | |||
| 25 | $ 1.39 | |||
| 100 | $ 1.18 | |||
| Digi-Reel® | 1 | $ 1.64 | ||
| 10 | $ 1.47 | |||
| 25 | $ 1.39 | |||
| 100 | $ 1.18 | |||
| Tape & Reel (TR) | 250 | $ 1.11 | ||
| 500 | $ 0.98 | |||
| Texas Instruments | SMALL T&R | 1 | $ 1.75 | |
| 100 | $ 1.45 | |||
| 250 | $ 1.04 | |||
| 1000 | $ 0.78 | |||
Description
General part information
TPS2541A Series
The TPS2540/40A and TPS2541/41A are a combination of current-limited USB port power switch with a USB 2.0 high-speed data line (D+/D-) switch and a USB charging port identification circuit. Applications include notebook PCs and other intelligent USB host devices. The wide bandwidth (2.6 GHz) data-line switch also features low capacitance and low on resistance, allowing signals to pass with minimum edge and phase distortion. The TPS2540/40A/41/41A monitors D+ and D-, providing the correct hand-shaking protocol with compliant client devices.
The TPS2540/40A/41/41A supports the following charging logic schemes:
CTL1-CTL3 logic inputs are used to select one of the various charge modes provided by the TPS2540/40A and TPS2541/41A . These charge modes allow the host device to actively select between Dedicated Charging Port (DCP) (wall-adapter emulation), Charging Downstream Port (CDP) (active USB 2.0 data communications with 1.5-A support), or Standard Downstream Port (SDP) USB 2.0 Mode (active USB 2.0 data communications with 500-mA support). The TPS2540/40A/41/41A also integrates anauto-detectfeature that supports both DCP schemes for Battery Charging Specification (BC1.2) and the Divider Mode without the need for outside user interaction.
Documents
Technical documentation and resources