Specification	SN74CBT16244CDGGR

Circuit	4 x 1:1
Independent Circuits	4
Mounting Type	Surface Mount
Operating Temperature [Max]	85 °C
Operating Temperature [Min]	-40 °C
Package / Case	48-TFSOP
Package / Case	0.24 in
Package / Case [custom]	6.1 mm
Supplier Device Package	48-TSSOP
Type	Bus Switch
Voltage - Supply [Max]	5.5 V
Voltage - Supply [Min]	4.5 V
Voltage Supply Source	Single Supply

SN74CBT16244C Series

5V, 1:1 (SPST), 16-channel FET bus switch with –2V undershoot protection and four control inputs

Part	Package / Case	Package / Case	Mounting Type	Operating Temperature [Max]	Operating Temperature [Min]	Type	Voltage Supply Source	Independent Circuits	Voltage - Supply [Min]	Voltage - Supply [Max]	Circuit	Package / Case [custom]	Supplier Device Package	Package / Case [y]	Package / Case [y]
Texas Instruments SN74CBT16244CDGVR	0.173 in 4.4 mm	48-TFSOP	Surface Mount	85 °C	-40 °C	Bus Switch	Single Supply	4	4.5 V	5.5 V	4 x 1:1
Texas Instruments SN74CBT16244CDGGR	0.24 in	48-TFSOP	Surface Mount	85 °C	-40 °C	Bus Switch	Single Supply	4	4.5 V	5.5 V	4 x 1:1	6.1 mm	48-TSSOP
Texas Instruments SN74CBT16244DL		48-BSSOP	Surface Mount	85 °C	-40 °C	Bus Switch	Single Supply	4	4.5 V	5.5 V	4 x 1:1		48-SSOP	0.295 in	7.5 mm
Texas Instruments SN74CBT16244CDL		48-BSSOP	Surface Mount	85 °C	-40 °C	Bus Switch	Single Supply	4	4.5 V	5.5 V	4 x 1:1		48-SSOP	0.295 in	7.5 mm

Pricing

Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly

Distributor	Package	Quantity	$

Digikey	Cut Tape (CT)	1	$ 1.81
	Digi-Reel®	1	$ 1.81
	Tape & Reel (TR)	2000	$ 0.83
		6000	$ 0.80
		10000	$ 0.77
Texas Instruments	LARGE T&R	1	$ 1.36
		100	$ 1.12
		250	$ 0.81
		1000	$ 0.61

Description

General part information

SN74CBT16244C Series

The SN74CBT16244C is a high-speed TTL-compatible FET bus switch with low ON-state resistance (ron), allowing for minimal propagation delay. Active Undershoot-Protection Circuitry on the A and B ports of the SN74CBT16244C provides protection for undershoot up to –2 V by sensing an undershoot event and ensuring that the switch remains in the proper OFF state.

The SN74CBT16244C is organized as four 4-bit bus switches with separate output-enable (1OE\, 2OE\, 3OE\, 4OE\) inputs. It can be used as four 4-bit bus switches, two 8-bit bus switches, or as one 16-bit bus switch. When OE\ is low, the associated 4-bit bus switch is ON, and the A port is connected to the B port, allowing bidirectional data flow between ports. When OE\ is high, the associated 4-bit bus switch is OFF, and the high-impedance state exists between the A and B ports.

This device is fully specified for partial-power-down applications using Ioff. The Iofffeature ensures that damaging current will not backflow through the device when it is powered down.

Documents

Technical documentation and resources

Datasheet

SN74CBT16244CDGGR

Deep-Dive with AI

SN74CBT16244CDGGR

Deep-Dive with AI

Technical Specifications

SN74CBT16244C Series

Pricing

Description

SN74CBT16244C Series

Documents

Datasheet

Multiplexers and Signal Switches Glossary (Rev. B)

Semiconductor Packing Material Electrostatic Discharge (ESD) Protection

CBT-C, CB3T, and CB3Q Signal-Switch Families (Rev. C)

Signal Switch Data Book (Rev. A)

Little Logic Guide 2018 (Rev. G)

SN74CBT16244C datasheet (Rev. A)

Selecting the Correct Texas Instruments Signal Switch (Rev. E)

Eliminate Power Sequencing with Powered-off Protection Signal Switches (Rev. C)

Logic Guide (Rev. AB)

Digital Bus Switch Selection Guide (Rev. A)

Understanding and Interpreting Standard-Logic Data Sheets (Rev. C)

Bus FET Switch Solutions for Live Insertion Applications

LOGIC Pocket Data Book (Rev. B)

SN74CBT16244C Series