SN74LVT245BRGYR
Active3.3-V ABT OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
Deep-Dive with AI
Search across all available documentation for this part.
SN74LVT245BRGYR
Active3.3-V ABT OCTAL BUS TRANSCEIVERS WITH 3-STATE OUTPUTS
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | SN74LVT245BRGYR |
|---|---|
| Current - Output High, Low [custom] | 64 mA |
| Current - Output High, Low [custom] | 32 mA |
| Mounting Type | Surface Mount |
| Number of Bits per Element | 8 |
| Number of Elements | 1 |
| Operating Temperature [Max] | 85 °C |
| Operating Temperature [Min] | -40 °C |
| Output Type | 3-State |
| Package / Case | 20-VFQFN Exposed Pad |
| Supplier Device Package | 20-VQFN (3.5x4.5) |
| Voltage - Supply [Max] | 3.6 V |
| Voltage - Supply [Min] | 2.7 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| Digikey | Cut Tape (CT) | 1 | $ 0.94 | |
| 10 | $ 0.84 | |||
| 25 | $ 0.79 | |||
| 100 | $ 0.65 | |||
| 250 | $ 0.61 | |||
| 500 | $ 0.54 | |||
| 1000 | $ 0.43 | |||
| Digi-Reel® | 1 | $ 0.94 | ||
| 10 | $ 0.84 | |||
| 25 | $ 0.79 | |||
| 100 | $ 0.65 | |||
| 250 | $ 0.61 | |||
| 500 | $ 0.54 | |||
| 1000 | $ 0.43 | |||
| Tape & Reel (TR) | 3000 | $ 0.40 | ||
| 6000 | $ 0.38 | |||
| 15000 | $ 0.36 | |||
| Texas Instruments | LARGE T&R | 1 | $ 0.63 | |
| 100 | $ 0.48 | |||
| 250 | $ 0.35 | |||
| 1000 | $ 0.25 | |||
Description
General part information
SN74LVT245B Series
This octal bus transceiver is designed specifically for low-voltage (3.3-V) VCCoperation, but with the capability to provide a TTL interface to a 5-V system environment.
The SN74LVT245B is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\ input can be used to disable the device so the buses are effectively isolated.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCCthrough a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
Documents
Technical documentation and resources
