GD75323DW
Obsolete5-V MULTICHANNEL 120KBPS RS-232 LINE DRIVER/RECEIVER WITH +/-7.5V OUTPUT
Deep-Dive with AI
Search across all available documentation for this part.
GD75323DW
Obsolete5-V MULTICHANNEL 120KBPS RS-232 LINE DRIVER/RECEIVER WITH +/-7.5V OUTPUT
Deep-Dive with AI
Technical Specifications
Parameters and characteristics for this part
| Specification | GD75323DW |
|---|---|
| Data Rate | 120 Kbps |
| Duplex | Full |
| Mounting Type | Surface Mount |
| Number of Drivers/Receivers [custom] | 5 |
| Number of Drivers/Receivers [custom] | 3 |
| Operating Temperature [Max] | 70 °C |
| Operating Temperature [Min] | 0 °C |
| Package / Case | 20-SOIC |
| Package / Case [y] | 0.295 in |
| Package / Case [y] | 7.5 mm |
| Protocol | RS232 |
| Receiver Hysteresis | 500 mV |
| Supplier Device Package | 20-SOIC |
| Type | Transceiver |
| Voltage - Supply [Max] | 5.5 V |
| Voltage - Supply [Min] | 4.5 V |
Pricing
Prices provided here are for design reference only. For realtime values and availability, please visit the distributors directly
| Distributor | Package | Quantity | $ | |
|---|---|---|---|---|
| TME | N/A | 1 | $ 0.32 | |
| 5 | $ 0.30 | |||
| Texas Instruments | TUBE | 1 | $ 1.44 | |
| 100 | $ 1.19 | |||
| 250 | $ 0.85 | |||
| 1000 | $ 0.64 | |||
Description
General part information
GD75323 Series
The GD75323 combines five drivers and three receivers from the trade-standard SN75188 and SN75189 bipolar quadruple drivers and receivers, respectively. The flow-through design of the GD75323 decreases the part count, reduces the board space required, and allows easy interconnection of the UART and serial-port connector. The all-bipolar circuits and processing of the GD75323 provide a rugged, low-cost solution for this function.
The GD75323 complies with the requirements of the ANSI TIA/EIA-232-F and ITU (formerly CCITT) V.28 standards. These standards are for data interchange between a host computer and a peripheral at signal rates up to 20 kbit/s. The switching speeds of the GD75323 are fast enough to support rates up to 120 kbit/s with lower capacitive loads (shorter cables). Interoperability at the higher signaling rates cannot be assured unless the designer has design control of the cable and the interface circuits at both ends. For interoperability at signaling rates up to 120 kbit/s, use of ANSI Standard TIA/EIA-423-B and TIA/EIA-422-B and ITU Recommendations V.10 and V.11 are recommended.
The GD75323 is characterized for operation over a temperature range of 0°C to 70°C.
Documents
Technical documentation and resources